sheetcam post processor

Having problems with or questions about SheetCam? Post them here.
Post Reply
glen venable
Posts: 7
Joined: Sun Dec 01, 2019 2:33 am

sheetcam post processor

Post by glen venable »

What is the correct SheetCam post processor for mach3 running a crossfire table. I'm guessing Mach3 plasma but there are several that could be.
User avatar
Les Newell
Site Admin
Posts: 3661
Joined: Thu May 11, 2006 8:12 pm

Re: sheetcam post processor

Post by Les Newell »

That's a fixed height machine so the Mach3 plasma post should work. The post outputs Z axis movement commands but that should not matter.
glen venable
Posts: 7
Joined: Sun Dec 01, 2019 2:33 am

Re: sheetcam post processor

Post by glen venable »

Thank you Les
gorillamotors
Posts: 2
Joined: Sat Dec 14, 2019 1:56 am

Re: sheetcam post processor

Post by gorillamotors »

Glen How do you like your crossfire table? I just placed an order for the Pro version when it comes out.
Jim
"Life is tough, but it's tougher when you're stupid". Sgt Stryker
Post Reply