Fake movement

Having problems with or questions about SheetCam? Post them here.
Post Reply
Metal Signature
Posts: 2
Joined: Wed Nov 20, 2019 7:17 pm

Fake movement

Post by Metal Signature »

Hello. Can someone please help me. Here is my problem, I have a plasma table without z axis. When I send a file from Sheetcam to Mach3 there is some wrong movement to the right before starting to cut (see photo) Mach3 to confirm that the problem comes from my post processor. How to eliminate these false movements ???

Thanks
Attachments
5EB2E941-7975-4C1F-A461-FF3C1A23232D.jpeg
5EB2E941-7975-4C1F-A461-FF3C1A23232D.jpeg (638.81 KiB) Viewed 408 times
5ADE403E-4439-43A8-ABED-3D0F9A3656C2.jpeg
5ADE403E-4439-43A8-ABED-3D0F9A3656C2.jpeg (656.36 KiB) Viewed 408 times
User avatar
djreiswig
Posts: 471
Joined: Sat Feb 20, 2016 4:47 am
Location: SE Nebraska

Re: Fake movement

Post by djreiswig »

Can you post the gcode?
Metal Signature
Posts: 2
Joined: Wed Nov 20, 2019 7:17 pm

Re: Fake movement

Post by Metal Signature »

ok I'll come back with that
Post Reply