6.1.59 Problems

Having problems with or questions about SheetCam? Post them here.
David_Lelen01
Posts: 452
Joined: Wed Sep 12, 2018 8:18 pm
Location: South Carolina, USA
Contact:

6.1.59 Problems

Post by David_Lelen01 »

Hi Les,

Here are a few issues ive noticed already with the latest version:

1. The shape library is missing all the shapes. The directory is empty.
2. When opening the tool table editor, the table opens in a corner of the window and it cannot be expanded.

See attached photos for reference.
Attachments
2.JPG
2.JPG (118.28 KiB) Viewed 10783 times
1.JPG
1.JPG (48.33 KiB) Viewed 10783 times
User avatar
Les Newell
Site Admin
Posts: 3661
Joined: Thu May 11, 2006 8:12 pm

Re: 6.1.59 Problems

Post by Les Newell »

Sorry about that. I'll release an update shortly.
David_Lelen01
Posts: 452
Joined: Wed Sep 12, 2018 8:18 pm
Location: South Carolina, USA
Contact:

Re: 6.1.59 Problems

Post by David_Lelen01 »

No problem, just letting you know
David_Lelen01
Posts: 452
Joined: Wed Sep 12, 2018 8:18 pm
Location: South Carolina, USA
Contact:

Re: 6.1.59 Problems

Post by David_Lelen01 »

Found another bug Les... when the overcut in the operation is specified to be anything other than 0, the lead out is not shown regardless of type of length of leadout.

And while we're on the subject of the overcut, in the properties for each start point, would it be possible to specify a different overcut value instead of only disabling the overcut?
User avatar
Les Newell
Site Admin
Posts: 3661
Joined: Thu May 11, 2006 8:12 pm

Re: 6.1.59 Problems

Post by Les Newell »

This will be fixed in the next release. I'll also add overcut length.
David_Lelen01
Posts: 452
Joined: Wed Sep 12, 2018 8:18 pm
Location: South Carolina, USA
Contact:

Re: 6.1.59 Problems

Post by David_Lelen01 »

Awesome Les, thank you so much!!

One last thing i just found now, perhaps i'm being picky... When the new override overcut is checked and set to 0 and start point is a square corner, tangent leadins are not truly tangent. When the operation overcut is 0 and the override overcut is disabled, it works as i would expect. see the attached screenshots.
Attachments
without overcut.JPG
without overcut.JPG (47.79 KiB) Viewed 10743 times
with overcut.JPG
with overcut.JPG (58.12 KiB) Viewed 10743 times
User avatar
Les Newell
Site Admin
Posts: 3661
Joined: Thu May 11, 2006 8:12 pm

Re: 6.1.59 Problems

Post by Les Newell »

Huh, that shouldn't happen. I'll look into it.
SeanP
Posts: 217
Joined: Wed Oct 23, 2013 9:50 am

Re: 6.1.59 Problems

Post by SeanP »

Did you get a chance to look at this as well Les?

https://www.forum.sheetcam.com/viewtopi ... 055#p26152
User avatar
Les Newell
Site Admin
Posts: 3661
Joined: Thu May 11, 2006 8:12 pm

Re: 6.1.59 Problems

Post by Les Newell »

I can't replicate that fault. I will run some more tests.
SeanP
Posts: 217
Joined: Wed Oct 23, 2013 9:50 am

Re: 6.1.59 Problems

Post by SeanP »

It does it on both my win 7 machines, I can open a job file from sheetcam no problem, its when you open a job file from outside sheetcam the problem is, it opens the job file but it seem to be a copy, says untitled in the title bar.
Many thanks
luis lopez
Posts: 50
Joined: Sun Nov 24, 2013 12:44 am

Re: 6.1.59 Problems

Post by luis lopez »

Hello
Problem with Rules if I do not want to run it and put none then executed the postprocessor insert the rules in the G code
Attachments
2.png
2.png (26.95 KiB) Viewed 10722 times
1.png
1.png (48.3 KiB) Viewed 10722 times
MDG.job
(95.08 KiB) Downloaded 66 times
luis lopez
Posts: 50
Joined: Sun Nov 24, 2013 12:44 am

Re: 6.1.59 Problems

Post by luis lopez »

This is the postprocessor that I am using
Attachments
Mach3 THC M25 y Marcador de chapa.scpost
(10.1 KiB) Downloaded 70 times
luis lopez
Posts: 50
Joined: Sun Nov 24, 2013 12:44 am

Re: 6.1.59 Problems

Post by luis lopez »

I have already solved it was postprocessor problem :oops:
David_Lelen01
Posts: 452
Joined: Wed Sep 12, 2018 8:18 pm
Location: South Carolina, USA
Contact:

Re: 6.1.59 Problems

Post by David_Lelen01 »

Hey Les,

I'm not sure if the .63 update was supposed to fix the issue with the overcut on the corners, but if it was, the problem still exists on mine.
User avatar
Les Newell
Site Admin
Posts: 3661
Joined: Thu May 11, 2006 8:12 pm

Re: 6.1.59 Problems

Post by Les Newell »

Could you send me a job file that demonstrates the problem.
Post Reply