Slow feed rate

Having problems with or questions about SheetCam? Post them here.
Post Reply
T3N Rural
Posts: 1
Joined: Fri Aug 02, 2019 8:45 pm

Slow feed rate

Post by T3N Rural »

G'day all, I'm new to this forum and have just started using sheetcam with a Swifty 600 table. I'm having trouble with the feed rate when I load my Gcode into my CNC program, the feed rate goes to 10mm / minute, even though I have my tool and the operation feed rates set to 6500mm / min.
Any help greatly appreciated.
Post Reply