Where are toolsets stored in Linux?

Having problems with or questions about SheetCam? Post them here.
Post Reply
motoguy
Posts: 103
Joined: Sun May 01, 2016 12:02 am

Where are toolsets stored in Linux?

Post by motoguy » Tue Apr 09, 2019 11:49 pm

Les,

Can you tell me where I'll find the default storage directory for toolsets in Linux? I've got Sheetcam on my windows office machine, and Linux table machine. I use the Windows box for most of the "heavy lifting" for cut files, but occasionally need to tweak settings/layouts tableside. As such, my tableside/Linux toolsets are my "standard" toolsets...they're the ones I actually cut with.

I'm trying to set an automated routine to copy the Linux toolsets to the Windows Sheetcam storage directory, so I'm worrying about having the "wrong" toolset in a file.

Can you tell me where to find the toolset file on the Linux box? Specifically, a CommandCNC linux machine? I noticed the Linux help menu does not have the "open settings folder" menu option, and I've thus far been unable to locate the actual file.

Thanks!

User avatar
Les Newell
Site Admin
Posts: 2281
Joined: Thu May 11, 2006 8:12 pm

Re: Where are toolsets stored in Linux?

Post by Les Newell » Wed Apr 10, 2019 8:25 am

it is in the .SheetCamTNG folder in your home folder. This is a hidden folder so you need to make sure 'show hidden files' is enabled in your file manager.

motoguy
Posts: 103
Joined: Sun May 01, 2016 12:02 am

Re: Where are toolsets stored in Linux?

Post by motoguy » Wed Apr 10, 2019 5:04 pm

Les Newell wrote:
Wed Apr 10, 2019 8:25 am
it is in the .SheetCamTNG folder in your home folder. This is a hidden folder so you need to make sure 'show hidden files' is enabled in your file manager.
Thanks Les!

Post Reply