Inkscape image to cut in sheetcam

Having problems with or questions about SheetCam? Post them here.
Post Reply
Ghscncclass
Posts: 9
Joined: Mon Oct 22, 2018 8:31 pm

Inkscape image to cut in sheetcam

Post by Ghscncclass »

Hello, I just started working with the cnc machine that our school got. I am trying to cut out a bulldog for our school, but cannot get it to cut correctly. Is there a way that I can cut out the white portion of the image instead of the black outline? Thanks in advance.
Attachments
20181022_133520.jpg
20181022_133520.jpg (1.26 MiB) Viewed 1035 times
Last edited by Ghscncclass on Tue Oct 23, 2018 7:52 pm, edited 1 time in total.
User avatar
Les Newell
Site Admin
Posts: 3660
Joined: Thu May 11, 2006 8:12 pm

Re: Inkscape image to cut in sheetcam

Post by Les Newell »

It is difficult to know exactly what you want to do from your description. A picture or drawing file would help.
User avatar
Les Newell
Site Admin
Posts: 3660
Joined: Thu May 11, 2006 8:12 pm

Re: Inkscape image to cut in sheetcam

Post by Les Newell »

Sorry, your message was in the moderation queue and attachments aren't shown then.
Use an 'outside offset'. That will make it cut outside the black areas.
Post Reply