Putting separate parts on same layer.

Having problems with or questions about SheetCam? Post them here.
Post Reply
mancavedweller
Posts: 161
Joined: Tue Feb 25, 2014 6:53 am

Putting separate parts on same layer.

Post by mancavedweller »

Hi Les,

I came across something new (for me) today.

I had and existing job file with one part comprised of 4 different layers.

I imported a 2nd part which had its own single layer.

This is when I found out I cannot move anything from a layer of one part to a layer of another part. Is this the way Sheetcam operates or have I simply missed a way of accomplishing this. At present it appears I can only move things between layers that belong to the same part.

Cheers,

Keith.
User avatar
Les Newell
Site Admin
Posts: 3661
Joined: Thu May 11, 2006 8:12 pm

Re: Putting separate parts on same layer.

Post by Les Newell »

That's right I'm afraid. You can't move layers to different parts.
mancavedweller
Posts: 161
Joined: Tue Feb 25, 2014 6:53 am

Re: Putting separate parts on same layer.

Post by mancavedweller »

OK, thanks Les.
Post Reply