Open lines are closed by sheetcam

Having problems with or questions about SheetCam? Post them here.
Post Reply
Black70
Posts: 9
Joined: Sun Apr 02, 2017 3:11 am

Open lines are closed by sheetcam

Post by Black70 »

I have this eagle who has a lot of lines in it. I made the sign with Coral Draw and in my drawings I cannot find anything wrong with the file. In sheetcam, it's closing all the open lines to closed shapes. Not sure what i'm doing wrong. Even if I try with no offset.
Bike fest sign.dxf
(493.5 KiB) Downloaded 71 times
User avatar
Les Newell
Site Admin
Posts: 3660
Joined: Thu May 11, 2006 8:12 pm

Re: Open lines are closed by sheetcam

Post by Les Newell »

Sorry, I missed this post. If you are still working on this go to Options->application options->drawing import. Reduce the 'import link tolerance' value to something less than the smallest gap you want left open.
Black70
Posts: 9
Joined: Sun Apr 02, 2017 3:11 am

Re: Open lines are closed by sheetcam

Post by Black70 »

No problem sir. I checked what you said and it's at .0004 My lines are not that small. They vary from an inch to longer. Not sure if I understood that correctly. Tks
Post Reply