Outside contour is off on Y demintion

Having problems with or questions about SheetCam? Post them here.
Post Reply
Campgems
Posts: 2
Joined: Sun Aug 02, 2015 5:13 pm

Outside contour is off on Y demintion

Post by Campgems »

Attempting an outside contour an I'm finding that the Y offset for tool diameter is off by +0.005" X offset is correct. In my case, using a 1/4" end mill, the Y offset is 0.130 and the X offset is 0.125 as expected. Is this something I've done?

TNG 6.0.25

Don
Campgems
Posts: 2
Joined: Sun Aug 02, 2015 5:13 pm

Re: Outside contour is off on Y demintion

Post by Campgems »

Les, I attached the job and tap file for this problem on yahoo. How do I send them to you?

Don
User avatar
Les Newell
Site Admin
Posts: 3661
Joined: Thu May 11, 2006 8:12 pm

Re: Outside contour is off on Y demintion

Post by Les Newell »

You can email them, PM me with an attachment or post them on this thread.
User avatar
Les Newell
Site Admin
Posts: 3661
Joined: Thu May 11, 2006 8:12 pm

Re: Outside contour is off on Y demintion

Post by Les Newell »

Sorry, I misunderstood you. I have them from the Yahoo list.
Post Reply