Attempting an outside contour an I'm finding that the Y offset for tool diameter is off by +0.005" X offset is correct. In my case, using a 1/4" end mill, the Y offset is 0.130 and the X offset is 0.125 as expected. Is this something I've done?
TNG 6.0.25
Don
Outside contour is off on Y demintion
Re: Outside contour is off on Y demintion
Les, I attached the job and tap file for this problem on yahoo. How do I send them to you?
Don
Don
- Les Newell
- Site Admin
- Posts: 3665
- Joined: Thu May 11, 2006 8:12 pm
Re: Outside contour is off on Y demintion
You can email them, PM me with an attachment or post them on this thread.
- Les Newell
- Site Admin
- Posts: 3665
- Joined: Thu May 11, 2006 8:12 pm
Re: Outside contour is off on Y demintion
Sorry, I misunderstood you. I have them from the Yahoo list.