Warnings

Having problems with or questions about SheetCam? Post them here.
Post Reply
Rifeline
Posts: 5
Joined: Mon Jan 29, 2018 11:18 pm

Warnings

Post by Rifeline »

Hi, I loaded a drawing(one layer)and when post processing got many warnings (100+) that said "cut start is above rapid clearance plane". I have no idea what that means.
User avatar
Les Newell
Site Admin
Posts: 3660
Joined: Thu May 11, 2006 8:12 pm

Re: Warnings

Post by Les Newell »

Your pierce height is above the rapid clearance height. You can set the rapid clearance height in Options->Job options->material.
Post Reply