Help! No code generated

Having problems with or questions about SheetCam? Post them here.
Post Reply
Robertcarterknives
Posts: 12
Joined: Tue Jun 06, 2017 1:38 pm

Help! No code generated

Post by Robertcarterknives »

I've had sheetcam for 5-6 months now. Was running some parts yesterday with no issues. Change out part. Go over to my computer to import a new drawing. Cam everything as always. Tried to post and sheet cam was only sending base command codes to the machine. Also have a no federate warning when I try to simulate. Any help would be appreciated.

Robert
rrossetti
Posts: 8
Joined: Sun Jan 29, 2017 4:53 pm

Post by rrossetti »

hi are you talking about mach3?
i have seen this issue before on mach3
open gcode make sure file types are tap and not all files
that should cure it
User avatar
Les Newell
Site Admin
Posts: 3661
Joined: Thu May 11, 2006 8:12 pm

Post by Les Newell »

This is my fault. I have sent you a new license which should sort out the problem.
Robertcarterknives
Posts: 12
Joined: Tue Jun 06, 2017 1:38 pm

Post by Robertcarterknives »

I received the new license agreement and I am back up and running as of a few days ago. Thank you Les!
Post Reply