rotary plasma custom shape

Having problems with or questions about SheetCam? Post them here.
Post Reply
fgilii
Posts: 4
Joined: Tue Feb 14, 2012 7:38 pm

rotary plasma custom shape

Post by fgilii »

Hello all,

I'm trying to create a custom shape for a Rotary plasma cutting machine, but I'm confused on how to center the profile I want with the center of rotation - The profile is a oblong tube 61 x 30 mm.

Another question is how to create a "guide drawing" like when we ask to work with a squade tube, but suited for the oblog profile...

Thank you and best regards

Fabio
hoangnhatng
Posts: 7
Joined: Wed Apr 05, 2017 4:59 am

Re: rotary plasma custom shape

Post by hoangnhatng »

hi all,
I have same this problem. Anybody can help me?
User avatar
Les Newell
Site Admin
Posts: 3660
Joined: Thu May 11, 2006 8:12 pm

Re: rotary plasma custom shape

Post by Les Newell »

The centre is taken from the part's position in SheetCam. Align the part so it's centre is at 0,0.
Post Reply