V carve RPM and array error

Having problems with or questions about SheetCam? Post them here.
Post Reply
jacala
Posts: 55
Joined: Thu Jun 20, 2013 6:18 pm

V carve RPM and array error

Post by jacala »

Hello!

For some reason sheetcam does not set the RPM setting right for the V carve module.

for some reason it is always S1000 instead of the S24000 that I want to work with.

See attachments for the problem.

another V carve problem:
When I array a part with normal operations (pocket, drill etc) everything is fine, when I array a part with a V-carve operation the V carve is not copied to the array.

Hoping to hear from somebody for the solution! See attachment for more info and G code. My settings wrong or just a error in sheetcam?

Jacala.
jacala
Posts: 55
Joined: Thu Jun 20, 2013 6:18 pm

Post by jacala »

User avatar
Les Newell
Site Admin
Posts: 3661
Joined: Thu May 11, 2006 8:12 pm

Post by Les Newell »

Could you post the job file so I can run some tests.
jacala
Posts: 55
Joined: Thu Jun 20, 2013 6:18 pm

Post by jacala »

Hi Les!

http://speedy.sh/2u8uC/test-for-les.job

It a different file but with the same problem.
User avatar
Les Newell
Site Admin
Posts: 3661
Joined: Thu May 11, 2006 8:12 pm

Post by Les Newell »

I found the problem. I'll release an update shortly.
Juan
Posts: 7
Joined: Wed Oct 01, 2014 11:26 pm

V carve RPM and array error

Post by Juan »

Very good news

2014-10-21 9:36 GMT-03:00 Les Newell <forumadmin@forum.sheetcam.com (forumadmin@forum.sheetcam.com)>:
I found the problem. I'll release an update shortly.






jacala
Posts: 55
Joined: Thu Jun 20, 2013 6:18 pm

Post by jacala »

And thats why I always recommend your software!
Post Reply