How to edit toolbar on left side?

Having problems with or questions about SheetCam? Post them here.
Post Reply
DynMetalworks
Posts: 3
Joined: Sun Nov 13, 2016 12:00 am

How to edit toolbar on left side?

Post by DynMetalworks » Tue Jul 13, 2021 2:56 pm

How do I edit the the Operations buttons on the left side? I'd like to remove certain ones I don't use.

User avatar
djreiswig
Posts: 299
Joined: Sat Feb 20, 2016 4:47 am
Location: SE Nebraska

Re: How to edit toolbar on left side?

Post by djreiswig » Tue Jul 13, 2021 11:46 pm

I don't think you can directly edit that toolbar. You can change the machine type to remove the mill rotary buttons.

User avatar
Les Newell
Site Admin
Posts: 3063
Joined: Thu May 11, 2006 8:12 pm

Re: How to edit toolbar on left side?

Post by Les Newell » Wed Jul 14, 2021 12:35 pm

Yes, that's right. Go to Options->machine and make sure only the machine types you want are selected.

DynMetalworks
Posts: 3
Joined: Sun Nov 13, 2016 12:00 am

Re: How to edit toolbar on left side?

Post by DynMetalworks » Wed Jul 14, 2021 5:43 pm

Ok thanks

OldHippie62
Posts: 6
Joined: Fri May 08, 2020 9:18 pm

Re: How to edit toolbar on left side?

Post by OldHippie62 » Fri Jul 16, 2021 10:31 pm

If you go to Options/Application Options/Tool bars, it will give the option to edit or create new tool bars. Be careful though, it can be a little tricky.

User avatar
djreiswig
Posts: 299
Joined: Sat Feb 20, 2016 4:47 am
Location: SE Nebraska

Re: How to edit toolbar on left side?

Post by djreiswig » Fri Jul 16, 2021 10:34 pm

I don't think that works on the operation buttons.

Post Reply