Plasmatool Set for Razorweld Cut 45?

This is the place for any plugins, posts or other useful tools you have created.
Post Reply
omamed
Posts: 1
Joined: Mon Jun 21, 2021 10:45 pm

Plasmatool Set for Razorweld Cut 45?

Post by omamed » Tue Jul 20, 2021 2:20 pm

Hi, Really quite new to sheetcam world. I'm looking here to see if there is a "Plasmatool" set for the Razorweld Cut 45. I see that there is one for the Hypertherm XP45. Does such a thing exist, or do I have to build one on my own. Assumed someone would post a set that they were using and I could tweak from there for my own setup. Thanks for entertaining the newb post!

robertspark
Posts: 199
Joined: Thu Feb 26, 2015 12:11 am

Re: Plasmatool Set for Razorweld Cut 45?

Post by robertspark » Tue Jul 20, 2021 9:27 pm

https://forum.langmuirsystems.com/t/raz ... etcam/8921

https://forum.langmuirsystems.com/t/raz ... chart/1232

create your own, you will probably need to tweak it anyway to your setup but it will get you started.

(I use a hypertherm 45 non XP)

Post Reply