Torchmate processor

Posts redirected from the Yahoo mailing list
Post Reply
noclinkers
Posts: 5
Joined: Wed Apr 23, 2014 7:23 pm

Torchmate processor

Post by noclinkers »

Is there one that produces a .gm file? I am using the accumove 3 controler?
mechanicalman
Posts: 17
Joined: Sun Aug 28, 2016 4:18 am

Post by mechanicalman »

I think GM just means G-codes and M-codes. I've been trying different post-processors with no luck so far. The syntax surrounding the arcs is really unfamiliar to me.
Post Reply