Text not on drawing

Posts redirected from the Yahoo mailing list
Post Reply
ggeh
Posts: 4
Joined: Wed May 04, 2016 1:33 am

Text not on drawing

Post by ggeh » Wed May 04, 2016 9:44 am

I made a drawing in bobcad and put some text on it and saved as .dxf file. When i bring the drawing into sheetcam the drawing is there but the text is not. This is my first time putting text on a project to be cut on my plasma table. I dont know what im doing wrong or not doing. Any suggestions? Thanks gary

Post Reply