TNG Development V6.1.16 released

Posts redirected from the Yahoo mailing list
Post Reply
Les Newell les.newell@...

TNG Development V6.1.16 released

Post by Les Newell les.newell@... »

Hi all,

I have just uploaded Development V6.1.16 to www.sheetcam.com. This
release has the following changes.

Added: 'Always lift cutter when repositioning' option to zigzag cutting.
This stops the occasional diagonal cuts when zigzag pocketing.
Fixed: Missing tool number in milling/routing tool definitions
Fixed: Clicking on an open line from a generated shape will not select
that shape
Changed: Shape mode remembers the last shape selected when you switch to
another mode.
Fixed: 'New job' didn't clear the current shape if in shape mode.
Fixed: Locking up when loading some dxf files with splines.
Fixed: Saving material settings after changing some material parameters
saved the repvious values
Fixed: Post breakpoints only working on edited posts
Fixed: Crash if you click the 'run post' button while debugging a post.

Les


------------------------------------
Posted by: Les Newell <les.newell@fastmail.co.uk>
------------------------------------


------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/sheetcam/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/sheetcam/join
(Yahoo! ID required)

<*> To change settings via email:
sheetcam-digest@yahoogroups.com
sheetcam-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
sheetcam-unsubscribe@yahoogroups.com

<*> Your use of Yahoo Groups is subject to:
https://info.yahoo.com/legal/us/yahoo/utos/terms/
Post Reply