First post-Finding center of rotary part.

Posts redirected from the Yahoo mailing list
Post Reply
mille_4me@yahoo.com [s...

First post-Finding center of rotary part.

Post by mille_4me@yahoo.com [s... »

First just like to say hello. Have been reading post and there is a ton of imformation here. I have had a 4x4 plasma table made for me. Builder spent a day showing me Sheetcam and the Mach3 side of it. I have a little experience with Mach3 for my cnc mill and lathe.
I have too say watching the Sheetcam rotary video by wolfesmetalfabrication turned my world upside down. I have a question on that video. I use a edge finder with my mill, how do you find center with a plasma cutter? Will be cutting rectangular tubing sort of like the gussets made in the video. There will be holes opposite of each wing on the part. So finding center is really important. Thank You

__._,_.___
Posted by: mille_4me@yahoo.com
Image

Visit Your Group
Unsubscribe ([email]sheetcam-unsubscribe@yahoogroups.com?subject=Unsubscribe[/email]) • Terms of Use



__,_._,___
Post Reply