We are a small handrailing shop, that works mainly with small size and gage round/square tubing. We purchased a stand alone Rotary Plasma Machine from China (see enclosed photo),
to cut to length, cut angles, cut to fit joints, coping or notching, open holes, etc.
The machine came with NCstudio v9.1., Artcam and Type3. A poorly built machine, with no instructions, no buttons identification, etc., etc.
We have been using Sheetcam for about 5 years, and just purchased the Rotary Pipe Cutting module, which did have a NCstudio processor.
Any suggestions and advise on how to make it easy and fast to get the cutting data into Sheetcam? Can we do the angle cuts or notches directly in Sheetcam? Is there a way we could make like a Menu to select notches, cuts or holes for different tubes sizes and type?
Regards,
Jose M. Garcia
GARCINOX CORP.
Sent from my iPhone
On Jan 17, 2015, at 7:42 AM, Marius Liebenberg marius.liebenberg@yahoo.com (marius.liebenberg@yahoo.com) [sheetcam] <sheetcam@yahoogroups.com (sheetcam@yahoogroups.com)> wrote:
It was not Sent from my iPhone
Regards
Marius
http://www.cnccontrol.co.za
http://www.mastercut.co.za
On Friday, January 16, 2015 10:15 PM, "kohlgren@gmail.com (kohlgren@gmail.com) [sheetcam]" <sheetcam@yahoogroups.com (sheetcam@yahoogroups.com)> wrote:
in the windows menu open ''configure java'' go to security tab, enter http://cobratorch.net into the exceptions list still haven't told us anything about your machine. cad, cam and machine programs, this helps you not me
__._,_.___
View attachments on the web Posted by: Jose Maria Garcia <jmg@garcinox.com>
Visit Your Group
Unsubscribe ([email]sheetcam-unsubscribe@yahoogroups.com?subject=Unsubscribe[/email]) • Terms of Use
__,_._,___