Posts redirected from the Yahoo mailing list
Post Reply
Les Newell les.newell@...

Post by Les Newell les.newell@... »

This post pauses for half a second at the bottom of the hole. It also
stops short of the final depth by the axial travel amount. In other
words set axial travel to be the distance from the tap position in free
air to the point where it disengages.

At the moment the delay is hard coded. You can change it by editing line
259:
reverseDwell = 0.5

The post is just to test the moves. If it works I will modify SheetCam
to make the head type and dwell selectable.

Les

<*> View Attachments on Web https://groups.yahoo.com/neo/groups/she ... E5NjI5OTg-
------------------------------------
Posted by: Les Newell <les.newell@fastmail.co.uk>
------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/sheetcam/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/sheetcam/join
(Yahoo! ID required)

<*> To change settings via email:
sheetcam-digest@yahoogroups.com
sheetcam-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
sheetcam-unsubscribe@yahoogroups.com

<*> Your use of Yahoo Groups is subject to:
https://info.yahoo.com/legal/us/yahoo/utos/terms/
Attachments
Mach3-tap-dwell.scpost
(7.97 KiB) Downloaded 142 times
Post Reply