Hi all,
I have just uploaded Dev V6.1.6 to www.sheetcam.com. This release has
the following changes:
Fixed: Corner looping doing strange things on very sharp corners
Added: Operation name includes finish allowance if finish allowance is used
Changed: Post editor can now also open lua files
Added: Knife operation now allows corner loops
Fixed: Rotary simulation showing incorrect tool movements
Fixed: Rotary post not referencing correctly
Les
------------------------------------
Posted by: Les Newell <les.newell@fastmail.co.uk>
------------------------------------
Yahoo Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/sheetcam/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/sheetcam/join
(Yahoo! ID required)
<*> To change settings via email:
sheetcam-digest@yahoogroups.com
sheetcam-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
sheetcam-unsubscribe@yahoogroups.com
<*> Your use of Yahoo Groups is subject to:
https://info.yahoo.com/legal/us/yahoo/utos/terms/