Re: PLATE MARKING Question

Posts redirected from the Yahoo mailing list
Post Reply
K Ohlgren

Re: PLATE MARKING Question

Post by K Ohlgren »

i posted my recently completed $100 plate marker setup on pirate4x4 site if anyone would like to copy ithttp://www.pirate4x4.com/forum/shop-tools/1704098-100-scribe-setup-plasma-table.html



also posted a video on youtube for your viewing pleasure
https://www.youtube.com/watch?v=5O8rjZ_3c_4



i'm using the mach3 with scriber post. you need to edit gcode to add a m09 to turn the scribe off at the end of the scribe or it will drag the scribe around when cutting with plasma. i used a $19 electric scribe from home depot and bought most everything else on ebay.





__._,_.___
Image

Visit Your Group
Unsubscribe ([email]sheetcam-unsubscribe@yahoogroups.com?subject=Unsubscribe[/email]) • Terms of Use



__,_._,___
Rob
Posts: 17
Joined: Fri May 31, 2013 7:32 am

Re: PLATE MARKING Question

Post by Rob »

On the same note. A small drill head on a plasma cutter is a great asset. Even if your just center drilling your holes.



-------- Original message --------
From: K Ohlgren <kohlgren@gmail.com>
Date:
To: sheetcam@yahoogroups.com
Subject: [sheetcam] Re: PLATE MARKING Question


i posted my recently completed $100 plate marker setup on pirate4x4 site if anyone would like to copy ithttp://www.pirate4x4.com/forum/shop-tools/1704098-100-scribe-setup-plasma-table.html



also posted a video on youtube for your viewing pleasure
https://www.youtube.com/watch?v=5O8rjZ_3c_4



i'm using the mach3 with scriber post. you need to edit gcode to add a m09 to turn the scribe off at the end of the scribe or it will drag the scribe around when cutting with plasma. i used a $19 electric scribe from home depot and bought most everything else on ebay.






__._,_.___
Image

Visit Your Group
Unsubscribe ([email]sheetcam-unsubscribe@yahoogroups.com?subject=Unsubscribe[/email]) &bull; Terms of Use



__,_._,___
Post Reply