Nesting

Posts redirected from the Yahoo mailing list
Post Reply
Brian Martin

Nesting

Post by Brian Martin »

Am I missing something obvious? How do I rotate or invert a part so I can nest them closer? If I import multiple triangle shaped parts I there a way to invert some of the duplicates so the fit better on my material. I'm using Mach3 Plasma BTW.

Brian's iPhone :-)

------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/sheetcam/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/sheetcam/join
(Yahoo! ID required)

<*> To change settings via email:
sheetcam-digest@yahoogroups.com
sheetcam-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
sheetcam-unsubscribe@yahoogroups.com

<*> Your use of Yahoo Groups is subject to:
https://info.yahoo.com/legal/us/yahoo/utos/terms/
rikduk
Posts: 47
Joined: Fri Oct 25, 2013 11:48 pm

Post by rikduk »

You can rotate any part using the < and> keys.
To Mirror parts, you check either X or Y on the bottom right of your screen.
BUT,you cant Mirror duplicates, you can only Mirror the original or copies.
Post Reply