First of all, can you jog? In the machine window there are buttons that
should allow you to jog the machine. If not go to the file menu and make
sure you have 'Use Mach3' selected. In Mach3 go to Config->Config
plugins and make sure teh SheetCamRemote plugin is enabled.
Les
On 13/03/2014 20:24, Brian Martin wrote:
I have my camera all set up and focused but when I select Calibration/Run it says "Started Calibration" but the machine never moves? Any ideas?
Brian's iPhone
------------------------------------
Yahoo Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/sheetcam/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/sheetcam/join
(Yahoo! ID required)
<*> To change settings via email:
sheetcam-digest@yahoogroups.com
sheetcam-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
sheetcam-unsubscribe@yahoogroups.com
<*> Your use of Yahoo Groups is subject to:
https://info.yahoo.com/legal/us/yahoo/utos/terms/