Hi Les,
I'm creating a number of parts from the same dxf drawing. I've given each part
a meaningful name but if I reload the drawing the part name goes back to the
drawing name.
Is there a way to stop this?
Cheers,
Peter
---
This email is free from viruses and malware because avast! Antivirus protection is active.
http://www.avast.com
------------------------------------
Yahoo Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/sheetcam/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/sheetcam/join
(Yahoo! ID required)
<*> To change settings via email:
sheetcam-digest@yahoogroups.com
sheetcam-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
sheetcam-unsubscribe@yahoogroups.com
<*> Your use of Yahoo Groups is subject to:
https://info.yahoo.com/legal/us/yahoo/utos/terms/
Naming Parts in Sheetcan
Naming Parts in Sheetcan
Hi Pater,
Currently it always uses the drawing name. Does anyone else want the
option to not use the drawing name?
Les
On 01/03/2014 12:38, Peter Homann wrote:
------------------------------------
Yahoo Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/sheetcam/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/sheetcam/join
(Yahoo! ID required)
<*> To change settings via email:
sheetcam-digest@yahoogroups.com
sheetcam-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
sheetcam-unsubscribe@yahoogroups.com
<*> Your use of Yahoo Groups is subject to:
https://info.yahoo.com/legal/us/yahoo/utos/terms/
Currently it always uses the drawing name. Does anyone else want the
option to not use the drawing name?
Les
On 01/03/2014 12:38, Peter Homann wrote:
Hi Les,
I'm creating a number of parts from the same dxf drawing. I've given each part
a meaningful name but if I reload the drawing the part name goes back to the
drawing name.
Is there a way to stop this?
Cheers,
Peter
------------------------------------
Yahoo Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/sheetcam/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/sheetcam/join
(Yahoo! ID required)
<*> To change settings via email:
sheetcam-digest@yahoogroups.com
sheetcam-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
sheetcam-unsubscribe@yahoogroups.com
<*> Your use of Yahoo Groups is subject to:
https://info.yahoo.com/legal/us/yahoo/utos/terms/
Naming Parts in Sheetcan
That could be handy
Andy Wander
On Mar 3, 2014, at 12:09 PM, Les Newell <les.newell@fastmail.co.uk (les.newell@fastmail.co.uk)> wrote:
__._,_.___
Visit Your Group
Unsubscribe ([email]sheetcam-unsubscribe@yahoogroups.com?subject=Unsubscribe[/email]) • Terms of Use
__,_._,___
Andy Wander
On Mar 3, 2014, at 12:09 PM, Les Newell <les.newell@fastmail.co.uk (les.newell@fastmail.co.uk)> wrote:
Hi Pater,
Currently it always uses the drawing name. Does anyone else want the
option to not use the drawing name?
Les
On 01/03/2014 12:38, Peter Homann wrote:Hi Les,
I'm creating a number of parts from the same dxf drawing. I've given each part
a meaningful name but if I reload the drawing the part name goes back to the
drawing name.
Is there a way to stop this?
Cheers,
Peter
__._,_.___
Visit Your Group
Unsubscribe ([email]sheetcam-unsubscribe@yahoogroups.com?subject=Unsubscribe[/email]) • Terms of Use
__,_._,___
-
- Posts: 9
- Joined: Sun Dec 30, 2007 4:50 pm
Naming Parts in Sheetcan
Yes, that would be great!
Thanks Les,
Gary
On Mon, Mar 3, 2014 at 10:27 AM, Andy Wander <andywander@yahoo.com (andywander@yahoo.com)> wrote:
--
Gary J Hall
GJ Hall Enterprises
Edmonton, AB. T6E 0G6
__._,_.___
Visit Your Group
Unsubscribe ([email]sheetcam-unsubscribe@yahoogroups.com?subject=Unsubscribe[/email]) • Terms of Use
__,_._,___
Thanks Les,
Gary
On Mon, Mar 3, 2014 at 10:27 AM, Andy Wander <andywander@yahoo.com (andywander@yahoo.com)> wrote:
That could be handy
Andy Wander
On Mar 3, 2014, at 12:09 PM, Les Newell <les.newell@fastmail.co.uk (les.newell@fastmail.co.uk)> wrote:
Hi Pater,
Currently it always uses the drawing name. Does anyone else want the
option to not use the drawing name?
Les
On 01/03/2014 12:38, Peter Homann wrote:Hi Les,
I'm creating a number of parts from the same dxf drawing. I've given each part
a meaningful name but if I reload the drawing the part name goes back to the
drawing name.
Is there a way to stop this?
Cheers,
Peter
--
Gary J Hall
GJ Hall Enterprises
Edmonton, AB. T6E 0G6
__._,_.___
Visit Your Group
Unsubscribe ([email]sheetcam-unsubscribe@yahoogroups.com?subject=Unsubscribe[/email]) • Terms of Use
__,_._,___
Naming Parts in Sheetcan
Hi Les,
Thanks for considering it. I'm creating 4 parts from the 1 drawing and it
would help with knowing which part is witch. If you do make a change, can you
use the part name for the file name to write when processing the part and
generating the Gcode.?
Cheers,
Peter
On 4/03/2014 4:09 AM, Les Newell wrote:
This email is free from viruses and malware because avast! Antivirus protection is active.
http://www.avast.com
------------------------------------
Yahoo Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/sheetcam/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/sheetcam/join
(Yahoo! ID required)
<*> To change settings via email:
sheetcam-digest@yahoogroups.com
sheetcam-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
sheetcam-unsubscribe@yahoogroups.com
<*> Your use of Yahoo Groups is subject to:
https://info.yahoo.com/legal/us/yahoo/utos/terms/
Thanks for considering it. I'm creating 4 parts from the 1 drawing and it
would help with knowing which part is witch. If you do make a change, can you
use the part name for the file name to write when processing the part and
generating the Gcode.?
Cheers,
Peter
On 4/03/2014 4:09 AM, Les Newell wrote:
---Hi Pater,
Currently it always uses the drawing name. Does anyone else want the
option to not use the drawing name?
Les
On 01/03/2014 12:38, Peter Homann wrote:Hi Les,
I'm creating a number of parts from the same dxf drawing. I've given each part
a meaningful name but if I reload the drawing the part name goes back to the
drawing name.
Is there a way to stop this?
Cheers,
Peter
------------------------------------
Yahoo Groups Links
This email is free from viruses and malware because avast! Antivirus protection is active.
http://www.avast.com
------------------------------------
Yahoo Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/sheetcam/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/sheetcam/join
(Yahoo! ID required)
<*> To change settings via email:
sheetcam-digest@yahoogroups.com
sheetcam-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
sheetcam-unsubscribe@yahoogroups.com
<*> Your use of Yahoo Groups is subject to:
https://info.yahoo.com/legal/us/yahoo/utos/terms/
-
- Posts: 8
- Joined: Wed Mar 24, 2010 7:53 pm