Sheetcam to Mach3

Posts redirected from the Yahoo mailing list
Post Reply
senemhaskok

Sheetcam to Mach3

Post by senemhaskok »

Hi,

I want to use Sheetcam's Mach3 plug-in but, this error massage comes:

*************
Mach automatic file transfer

If Mach is available, post processed files can be automatically transferred.

Mach NOT detected.
This plugin is disabled.
*************

I can't transfer the G-Codes which I made with sheetcam to Mach3.

I will be glad if you help me.

Agah.





------------------------------------
Les Newell

Sheetcam to Mach3

Post by Les Newell »

I believe this is a problem with the Mach installer. The only solution I
have found so far is to install a very early version of Mach then
install the latest version over the top of it.

Regards,
Les Newell
http://www.sheetcam.com


On 13/03/2012 11:31, senemhaskok wrote:
Hi,

I want to use Sheetcam's Mach3 plug-in but, this error massage comes:

*************
Mach automatic file transfer

If Mach is available, post processed files can be automatically transferred.

Mach NOT detected.
This plugin is disabled.
*************

I can't transfer the G-Codes which I made with sheetcam to Mach3.

I will be glad if you help me.

Agah.

------------------------------------
russ079
Posts: 7
Joined: Fri Jan 13, 2017 7:50 pm

Post by russ079 »

Hi, I know this is an old post but, do you know which version of mach 3 comes with the remote plugin ?

Ive tried 3.042 r1.84 r2.48 and r2.63 but non had the remote plugin to use with sheetcam.

Does anyone what what version of mach comes with the plugin or just has the plugin to share?

Thanks
Russ
rrossetti
Posts: 8
Joined: Sun Jan 29, 2017 4:53 pm

Post by rrossetti »

here you go
Attachments
SheetCamRemote.dll.zip
(6.35 KiB) Downloaded 441 times
russ079
Posts: 7
Joined: Fri Jan 13, 2017 7:50 pm

Post by russ079 »

Thanks :D
LoxBox
Posts: 1
Joined: Tue Feb 07, 2017 9:19 am

Post by LoxBox »

rrossetti wrote:here you go
Yay, thanks.
Post Reply