Postprocessor

Posts redirected from the Yahoo mailing list
Post Reply
éÇÏÒØ âÉÒÍÁÎ

Postprocessor

Post by éÇÏÒØ âÉÒÍÁÎ » Mon Sep 03, 2007 7:26 am

Dear Sirs

I'd want buy Your SheetCam in case if you'll make new postrocessor for Biesse Rover NC500
Please inform me about conditions

Best regards

Igor Birman

LesNewell
Posts: 905
Joined: Sat May 13, 2006 2:34 pm

Postprocessor

Post by LesNewell » Mon Sep 03, 2007 8:15 am

Hi Igor,


Send me some samples of code and, if possible, a copy of the relevant
parts of the manual and I'll write a post for you. Send them to les {at}
sheetcam.com (replace the {at} with @).

Les

éÇÏÒØ âÉÒÍÁÎ wrote:
Dear Sirs

I'd want buy Your SheetCam in case if you'll make new postrocessor for Biesse Rover NC500
Please inform me about conditions

Best regards

Igor Birman

TRUE LIFESTILE
Posts: 1
Joined: Thu Sep 10, 2020 5:46 pm

Re: Postprocessor

Post by TRUE LIFESTILE » Thu Sep 10, 2020 6:12 pm

We have had this software for acouple years and have not been having any luck getting our machine to read any posts.
Biesse does not work on 3rd party software posts and cant help

Is anyone able to help us, we are wanting to use a draw knife to cut vinyl

Post Reply