SheetCAM Addon??

Posts redirected from the Yahoo mailing list
Post Reply
billfloyd806
Posts: 3
Joined: Thu Dec 22, 2016 9:44 pm

SheetCAM Addon??

Post by billfloyd806 » Tue Feb 28, 2017 6:30 pm

First, SHEETCAM is the best! I built my first plasma table and it works flawless. My question is do they make an addon for sheetcam that would allow me to cut heating/air cut work out? I've looked at some software, but WOW $$$$$$$. I figure this forum would be the best to ask around, can you recommend some software that will work and is affordable like SHEETCAM?

Thanks in advance

WyoGreen
Posts: 175
Joined: Wed May 07, 2014 10:02 pm

Post by WyoGreen » Tue Feb 28, 2017 11:54 pm

You might try a search over on PlasmaSpider.com.I know I have seem a few threads over there on this topic. It seems like there was mention of an online program that would do what you want for free.

Steve

billfloyd806
Posts: 3
Joined: Thu Dec 22, 2016 9:44 pm

Post by billfloyd806 » Wed Mar 01, 2017 1:41 pm

Thanks for the info

rrossetti
Posts: 6
Joined: Sun Jan 29, 2017 4:53 pm

Post by rrossetti » Wed Apr 26, 2017 7:20 pm


Appleber
Posts: 1
Joined: Tue Jan 02, 2018 10:36 am

Re: SheetCAM Addon??

Post by Appleber » Thu Jan 11, 2018 5:19 pm

This sounds almost too good to be true, Steve. Do you recall the name of the software by any chance?

Post Reply