%
(Filename: HMTA_CNC Part B-gofab.ngc)
(Post processor: Gofab plasma.scpost)
(Date: 10/01/2023)
G20 (Units: Inches)
G90
(Part: HMTA_CNC Part B)
(Operation: Drill, PUNCH2, T2: Plasma, 1.0mm tip, 40-50a, 0 in Deep)
G00 X0.6875 Y0.6875
G31 Z-100 F19.685
G92 Z-0.0591
(Start cutting path id: path3521)
(Change tool to Plasma cutter)
G00 Z0.2431
G01 M03
G04 P0.5
G01 Z0.0591 F3.937
G01 M05
(End cutting path id: path3521)
G00 X9.5625
(Start cutting path id: path3521)
(Change tool to Plasma cutter)
G00 Z0.2431
G01 M03
G04 P0.5
G01 M05
(End cutting path id: path3521)
G00 Y9.5625
(Start cutting path id: path3521)
(Change tool to Plasma cutter)
G00 Z0.2431
G01 M03
G04 P0.5
G01 M05
(End cutting path id: path3521)
G00 X0.6875
G31 Z-100 F19.685
G92 Z-0.0591
(Start cutting path id: path3521)
(Change tool to Plasma cutter)
G00 Z0.2431
G01 M03
G04 P0.5
G01 F3.937
G01 M05
(End cutting path id: path3521)
(Operation: Outside Offset, FIXTURE, T2: Plasma, 1.0mm tip, 40-50a)
G00 X10.4297 Y-0.1600
(Start cutting path id: path3521)
(Change tool to Plasma cutter)
G00 Z0.2431
G01 M03
G04 P0.5
G01 X10.3685 Y-0.1478 F78.7402
G01 X10.3166 Y-0.1131
G01 X10.2819 Y-0.0612
G01 X10.2697 Y0.0000
G01 Y10.2500
G01 X10.2500 Y10.2697
G01 X-0.0000
G01 X-0.0197 Y10.2500
G01 Y0.0000
G01 X-0.0000 Y-0.0197
G01 X10.2500
G01 X10.3112 Y-0.0319
G01 X10.3631 Y-0.0666
G01 X10.3978 Y-0.1185
G01 X10.4100 Y-0.1797
G00 Z0.0000
G00 X0.0000 Y0.0000 Z0.1250
M05 M30