; RotaryPlasma Plugin is enabled. 
; Post: 'GRBL plasma LDC w Rotary3.scpost' V30.5
; 'test G3 postproctube.nc' :GCode file
;  19/10/2024- 13:31:10 :GCode datestamp 
;
G00 G17 G40 G54 G94 G90 M5 M9 F0 S0 
G21  (metric mode)
;
; ***  ATTENTION OPERATOR  ***
;   Be sure to Zero Z (torch tip) to top of material
;
; === ROTARY JOB === 
;   Rotary YA Motion is configured 
;   Rotary Axis = A, is parallel to Y Axis 
;   Set WCS Y0.00 to front/chuck edge of rotary object 
;
; RECTANGLE TUBING ... Ready for machine testing 
;   Beam Height: 50.000 mm, Beam Width: 50.000 mm, Corner Radius: 5.000 mm
;   Wall Thickness: 2.000 mm, Map Drawing To Inside: 0
;   WCS Zero setup:  X0.00 A0.00 is the centerline of Rectangle WIDTH 
;
; *** ZERO Z ON APEX OF TUBING CORNER *** 
; ***  OPERATOR: Be aware that this job may use Z motion 
; ***            during cutting. Adjust your THC use accordingly. 
; ****  ATTENTION OPERATOR: Check Maximum Radius of rotary object- 
; ********  Max Radius should be: 33.284 mm **** 
;                                 ======= 
;
G28 G91 Z0  (retract Z to max for start of job)
G90
;
M0  (machine pause, Operator to CNC Ctrl Panel to Resume)
; ****  About to move XYZA to safeZ and first pierce position 
; **  Press CYCLE START or RESUME button when ready for motion. 
;
; Torch Probe Travel = 2.250 mm
; THC Present on machine? false
; Dynamic THC Enable? false
; Machine pause to retrieve finished part? false
; Air Supply Time: 5.0 minutes until machine pause action 
; TPC Proximity Distance = 700.000 mm
; Arcs As Moves = 0.000 mm
; Pierce delay no-post-flow-air delta (s/b negative) = -0.100 secs 
;
;********** Next Operation *****************************************
;*** Part Index: 0, Part Name: test G3 postproc
;*** Op Index: 0, Op name: Outside Offset, layer1, T5: 2mm acier Plasma, 1.2 mm kerf 40A
;
;*** Tool Name: 2mm acier Plasma, 1.2 mm kerf 40A
;**** Pierce Delay: 0.25s, Kerf width: 1.200 mm
;===== Part Index: 0, Op index: 0, Shape number: 1 ======
G0 X15.327 Y25.700 Z4.416 a0.000
G0 Z-5.784
G0 Z0 
G38.2 Z-12.250 F1000 (probe to find sw)
G38.5 Z0 (reverse probe to release material flex) 
G92 Z-10.534 (set Z0 relative to current position)
G0 Z-5.784 (goto pierce height) 
G0 X15.327 Y25.700 a0.000 (restore XYA precision after probe, avoids arc error33) 
M3 S1000 (fire the torch, No THC present)
;PD adjusted for NO post flow air 
G04 P0.03 (Plunge travel time: 0.12s, Total PD: 0.15s) 
G1 Z-6.784 F483
G1 X12.729 Y27.200 F2000
G2 X14.819 Y35.000 J7.800 I-13.510
G2 X14.219 Y35.600 J0.000 I-0.600
G1 X-15.781
G2 X-16.381 Y35.000 J-0.600 I0.000
G2 X-8.581 Y21.490 J0.000 I15.600
G2 X7.019 J13.510 I7.800
G2 X12.729 Y27.200 J13.510 I-7.800
G1 X15.327 Y25.700
;===== Part Index: 0, Op index: 0, Shape number: 2 ======
M5 (torch off) 
G04 P0.3 (allow time for torch arc to extinguish)
G0 Z12.700
G0 X12.371 Y52.595 Z4.416
G0 Z-5.784
; Torch Probe Cycle skipped due to pierce being within proximity of a previous pierce 
; 
M3 S1000 (fire the torch, No THC present)
G04 P0.13 (Plunge travel time: 0.12s, Total PD: 0.25s) 
G1 Z-6.784 F483
G1 X10.250 Y54.716 F2000
G2 X14.819 Y65.747 J11.031 I-11.031
G2 X-0.781 Y81.347 J0.000 I-15.600
G2 X-16.381 Y65.747 J-15.600 I-0.000
G2 X-0.781 Y50.147 J0.000 I15.600
G2 X10.250 Y54.716 J15.600 I0.000
G1 X12.371 Y52.595
;
;********** Next Operation *****************************************
;*** Part Index: 0, Part Name: test G3 postproc
;*** Op Index: 1, Op name: Inside Offset, Shape, T5: 2mm acier Plasma, 1.2 mm kerf 40A
;
;*** Tool Name: 2mm acier Plasma, 1.2 mm kerf 40A
;**** Pierce Delay: 0.25s, Kerf width: 1.200 mm
;===== Part Index: 0, Op index: 1, Shape number: 1 ======
M5 (torch off) 
G04 P0.3 (allow time for torch arc to extinguish)
G0 Z12.700
G0 X7.280 Y113.061 Z4.416
G0 Z-5.784
; Torch Probe Cycle skipped due to pierce being within proximity of a previous pierce 
; 
M3 S1000 (fire the torch, No THC present)
G04 P0.13 (Plunge travel time: 0.12s, Total PD: 0.25s) 
G1 Z-6.784 F483
G1 X9.401 Y115.182 F2000
G3 X13.619 Y105.000 J-10.182 I-10.182
G3 X-0.781 Y90.600 J0.000 I-14.400
G3 X-15.181 Y105.000 J14.400 I0.000
G3 X-0.781 Y119.400 J0.000 I14.400
G3 X9.401 Y115.182 J-14.400 I0.000
G1 X7.280 Y113.061
M5 (torch off) 
G04 P0.3 (allow time for torch arc to extinguish)
G0 Z12.700
S0 
M9 (disable Z THC and ADC)
G92.1 
G91  (relative motion mode) 
M5 M9 M30