Search found 484 matches
- Tue Oct 31, 2023 1:18 am
- Forum: Problems and questions
- Topic: Masso tube plasma post
- Replies: 15
- Views: 18004
Re: Masso tube plasma post
The PMs stay in your outbox until the receiver reads them.
- Mon Oct 30, 2023 9:08 pm
- Forum: Problems and questions
- Topic: Plasma peck drilling function issue
- Replies: 6
- Views: 4487
Re: Plasma peck drilling function issue
What post processor is the person who sent you the other image using? I think CandCNC is the one that has the peck pierce programmed into their post. You would probably have to add those functions to your post to get that to work.
- Mon Oct 30, 2023 8:15 pm
- Forum: Problems and questions
- Topic: Plasma peck drilling function issue
- Replies: 6
- Views: 4487
Re: Plasma peck drilling function issue
That's probably a different post processor. Tell us more about your system.
- Mon Oct 30, 2023 7:17 pm
- Forum: Problems and questions
- Topic: Plasma peck drilling function issue
- Replies: 6
- Views: 4487
Re: Plasma peck drilling function issue
On some plasma cutters the initial pierce is longer. After the post flow air is running, the pierce time is shorter. Try dry firing the torch before you start your code to get the air flowing and see if that works better.
- Fri Oct 27, 2023 7:05 pm
- Forum: Problems and questions
- Topic: Adding Options to Plasma Tool dialog - not enigh screen space
- Replies: 6
- Views: 6962
Re: Adding Options to Plasma Tool dialog - not enigh screen space
Can you make the lower section of the window display in 2 columns if there are too many fields to fit? I would think that would be easier than scrolling and would make better use of the window.
- Tue Oct 17, 2023 4:26 pm
- Forum: Problems and questions
- Topic: All pierces first?
- Replies: 3
- Views: 2840
Re: All pierces first?
There is a plugin that makes toolbar buttons that will let you easily run more that one post. I believe it's called moreposts. You could also add a setting to your post that would allow a switch of sorts in the operation that would toggle the pierces only. I think it would be easier to have 2 differ...
- Tue Oct 17, 2023 3:46 am
- Forum: Problems and questions
- Topic: All pierces first?
- Replies: 3
- Views: 2840
Re: All pierces first?
You will have to copy & edit your post processor to only perform the rapids & pierces and ignore the cut moves. What post are you using?
- Mon Sep 25, 2023 1:22 pm
- Forum: Problems and questions
- Topic: Rotary drawing issue
- Replies: 7
- Views: 3483
Re: Rotary drawing issue
It's in the operations screen. There's a checkbox.
- Tue Sep 19, 2023 10:57 am
- Forum: Problems and questions
- Topic: Where are predefined variables set?
- Replies: 5
- Views: 4399
Re: Where are predefined variables set?
On a rotary axis the Z is calculated from the center of the pipe not the surface.
- Sun Sep 17, 2023 6:05 pm
- Forum: Problems and questions
- Topic: Rotary drawing issue
- Replies: 7
- Views: 3483
Re: Rotary drawing issue
Split the hole on its own layer. Then you can inside offset the hole and outside offset the other lines. You might have to play with the start points to get the offset on the correct side. Also, make sure you select offset open paths.
- Fri Sep 15, 2023 11:04 am
- Forum: Problems and questions
- Topic: Where are predefined variables set?
- Replies: 5
- Views: 4399
Re: Where are predefined variables set?
Those variables are set in sheetcam based to the cut path. You can't set them. Are you trying to get your machine to park? There is a parking position in the settings.
- Sat Sep 02, 2023 11:04 pm
- Forum: Problems and questions
- Topic: part in a part
- Replies: 4
- Views: 3441
Re: part in a part
Maybe a picture would help, but wouldn't you want the part to cut on the outside? The material outside of the part is scrap, correct? So the leads should be in the scrap.
- Thu Aug 24, 2023 7:57 pm
- Forum: Problems and questions
- Topic: Post processing
- Replies: 3
- Views: 3283
Re: Post processing
Seems like these license issues cause strange symptoms. Why is there not just a clear indication displayed if the license is invalid?
- Tue Aug 15, 2023 12:36 am
- Forum: Problems and questions
- Topic: Need help with 4th axis post processor
- Replies: 4
- Views: 2545
Re: Need help with 4th axis post processor
Are you using the rotary plugin for SheetCam?
- Thu Aug 10, 2023 8:13 pm
- Forum: Problems and questions
- Topic: arc leadins throw grbl error:33
- Replies: 10
- Views: 6207
Re: arc leadins throw grbl error:33
I always figured the ramp angle was based on the cut speed and plunge rate. If they're the same then you get 45 degrees. Maybe I'm wrong.