sheetcam.com

What distinguishes the machines from each other is how quickly it changes direction.If it is possible to set this with a variable that acts on the process of contour analysis we think will be good. With Open CV, such an analysis could be most easily realized in my opinion. For example, all angles an...

Hi, I want to give you an idea that Mr Newell is hoping to take seriously and not just take it as a criticism. What I mean - in plasma cutting, height control is done by monitoring the voltage and it depends on the speed of the machine. So the laws of physics suggest that there are places in the out...

Bravo rodw, you obviously do a good job with Linux. I used to have expert help before, but I came to your conclusions and even ahead. That is exactly why I make my suggestions! I tried 1000/3000 / 6000mm / min and looked at the machine's distance to speed up or slow down. The results were such that ...

I think I will refuse to offer because it is not clear what the benefits of what I offer. That's why I will ask again - if the software succeeds in dividing the contours and the islands and the holes in this way, What is the problem with the CNC controller to execute the movement and the red plots s...

I have the feeling that you did not understand what I mean! Analyzing the contour that can be done by python software does not just recognize the parts of the contour, you know? It creates new parts that are running at different speeds. These new parts of the loop will be executed in a stream at a c...

First of all, I want to call my colleague that you are on the right track with the Linux CNC. We are also working in this direction and I hope we will soon have a decent result. Look at what I wrote about determining the distance that is critical for changing direction on your machine. Then, if you ...

Hello, Les you think about a poll in the forum about the cutting rules. Allow it to evaluate each of the rules.
Such a poll could give rise to a topic with suggestions for improvements and help you rethink some things.

I start thinking that you do not understand what I mean and what is valuable in what I offer, so I will try to analyze the rules that you have created: 1.After start - this rule is not done well because it does not conform to the Lead in length and should always be changed! If it has to be configure...

I have grown the THC to work extremely fast, and when this happens, it switches on just before the plasma stops, and then the Z axis travels about 3mm downward to activate the anti-collision sensor. That is why I use only some rules and manually set the action point where it is needed. That's why I ...

I use a modified by me post Mach3 plasma. The code for THC are M10Q255 and M11. I put them with a space forward to be seen easily.

I have already described the problem - in the end, just before M5 there is always a code for the release of THC.

Unfortunately, I would not say that this will help even I think it will worsen the situation. Holes should be treated as holes or even shapes and holes like arcs because in the case of offshore, it should be off-off and other off-on. I get a picture to show what I want Sheetkam to do. The purpose is...

I want to apologize first, I did not intend to offend anybody, especially if it offers something constructive. I hope the mancavedweller will forgive me. Please, if my tone is considered rude to give it a bad translation. On the occasion of the UCCNC I will give a link and only say that they have co...

Strangely, what you wrote seems to be Les Newell's secretary. All that I have written here is just something I suggest I do not want to force anyone to do something they do not want. Besides, I can make this offer to the Chinese competitor of Les, but I do not like anything Chinese except their food...

I do not say it's easy Les. If it was easy, we'd all do a program like Sheetcam and we would not write in your forum. I am able to predict the behavior of the machine - no machine can make a right angle of 90 degrees without slowing the speed before it and increasing it after it! Thus, the inertia o...