sheetcam.com

Try disabling the plugin then look at the log again. Do you still get a warning like this:
Assert failure in function wxDir::GetFirst (C:\wx-3.0\wxWidgets\src\msw\dir.cpp:409). must wxDir::Open() first ("IsOpened()")

Does it work if you choose a directory on your C drive?

Unfortunately that would be quite hard to implement.

I'm afraid there isn't much I can do about it in the short term. I'll add scrolling to the to-do list.

1080p should be plenty. The plasma tool dialog should fit on a 720p display. Are you running a post processor that adds a lot of extra options?

Hold down the shift key while dragging with the mouse. That will rotate the display.

The simplest way to do this is to use the parking position. In SheetCam go to Options->job options->parking. Turn on 'Use X' and 'Use Y' then enter the coordinates you want to move to.

If you go to YouTube and do a search for SheetCam tutorials you will find quite a few. The ones by Arclight Dynamics are very good.

How are you detecting wiggle and ramp?
I have to admit I would prefer to add an option allow the g-code to specify Z axis moves.

leadinType only specifies if it is a lead in or a lead out.

There isn't any easy way for the post to know of the pierce is a ramp or wiggle pierce.

I've had very good success with ELP cameras, such as this https://www.amazon.com/ELP-2-8-12mm-Varifocal-1-3megapixel-Android/dp/B01N8YH5VY/ref=sr_1_1_sspa?keywords=elp+camera&qid=1697639397&sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&psc=1 Even lighting is very important and these ca...

When you import the SVG file a box appears with a bunch of options. Is the pixel size set to 96DPI? If so, try changing it to 90.

Unfortunately quite a few download links broke when I upgraded to PHPBB3 some years ago back. It took a bit of hunting though backups but I think this may be the file you want.

What post processor are you using?
Could you post a copy of the tap file here.

The saving issue could be a problem with your license. What does it say in Help->about?

For the calibration, make sure you have the display set to 'Mask' or 'Mixed'. Is the dot flickering or breaking up? If so, try experimenting with the brightness slider.

What happens when you try to calibrate?