sheetcam.com

If this helps any, one thing I noticed is when I do a Drill Pierce it works correctly (doesn't have the extra Z move before the G28.1) 0040 G20 (Units: Inches) N0050 F1 N0060 G53 G90 G40 N0070 G00 Z1.0000 N0080 (Part: test) N0090 (Operation: Drill, Drill, T1: Plasma, 3/16 Steel 45Amp Finecut, 0 inch...

Hi Les,

Have you had a chance to. Look at the post?

Thanks!

Jeff Tice

With omic sensing Mach switch offset should also be set to 0...

If you could post a short bit of Gcode it will help rule out some things.

Also is the torch voltage set correctly? if set to high it can cause it to raise higher than the actual cutting height.

This is developmental ver 6.1.38 But it also does it in the stable release. It is definitely in the post processor and not sheetcam itself. It should ignore the pierce height move G0z.15 if it is doing a G28.1 Reference. But do the G0z.15 if it is not doing a G28.1 Reference.... I tried a few change...

Hi, There appears to be a small error with the PlasmaRotary Mach3 Post. I haven't quite figured out how to fix it. Here is the file.. The problem in red. N0010 (Filename: PowerSupplyBox.tap) N0020 (Post processor: PlasmaRotary Mach3.scpost) N0030 (Date: 06/01/2017) N0040 G20 (Units: Inches) N0050 F1...

That will work perfect! I didn't realize that there was that option.. I've been using standard Sheetcam and havn't used TNG much.

Thanks!

Hi, I'm just starting to use the Rotary Plasma plugin.. I really like it!. One question I have though. Is there a way to save pipe and tube sizes? I would like to make a database of various pipe and tubing I will be using. I tried using the save material option but I still have to enter the pipe/tub...