Search found 3656 matches
- Mon Mar 18, 2024 12:59 pm
- Forum: Problems and questions
- Topic: Mach4-swiftcut post processor
- Replies: 14
- Views: 1841
Re: Mach4-swiftcut post processor
I found the problem. As far as I can see, the post has always had this problem. That's why I didn't spot the issue before. I was only looking at stuff I had changed.
- Sat Mar 16, 2024 7:34 pm
- Forum: Problems and questions
- Topic: Sheetcam post process not creating Gcode
- Replies: 3
- Views: 635
Re: Sheetcam post process not creating Gcode
Do you get any warnings when you post process?
It could be a license issue. Try reinstalling your license. If that doesn't help, let me know your license ID. You can find it in Help->about.
It could be a license issue. Try reinstalling your license. If that doesn't help, let me know your license ID. You can find it in Help->about.
- Thu Mar 14, 2024 2:43 pm
- Forum: Problems and questions
- Topic: PostProcessor Mach3 Issue
- Replies: 1
- Views: 594
Re: PostProcessor Mach3 Issue
I'm not seeing any issue in the code. If you look in the tap file you should see this code: N0150 M03 N0160 G04 P1.3 Try changing the pierce delay to 0. After post processing you should see the G04 value change to 0. Is the pierce delay still 0.5s? If so I suspect you have a spindle on delay defined...
- Wed Mar 13, 2024 6:38 pm
- Forum: Problems and questions
- Topic: Mach4-swiftcut post processor
- Replies: 14
- Views: 1841
Re: Mach4-swiftcut post processor
I had a good look at the post and cannot see anything that could stop it outputting lead ins.
At the start of the cut, does the torch follow the lead in before it starts piercing?
At the start of the cut, does the torch follow the lead in before it starts piercing?
- Wed Mar 13, 2024 1:38 pm
- Forum: Problems and questions
- Topic: Mach4-swiftcut post processor
- Replies: 14
- Views: 1841
Re: Mach4-swiftcut post processor
Try changing the tool type to 3. If it now works the problem is probably in your Mach4 configuration.
- Wed Mar 13, 2024 12:45 pm
- Forum: Problems and questions
- Topic: Mach4-swiftcut post processor
- Replies: 14
- Views: 1841
Re: Mach4-swiftcut post processor
That sounds like your pierce delay is too short. The torch is starting moving before it has pierced.
- Tue Mar 12, 2024 10:11 am
- Forum: Problems and questions
- Topic: Mach4-swiftcut post processor
- Replies: 14
- Views: 1841
Re: Mach4-swiftcut post processor
I found the problem. I have attached a fixed version of the post. Save the attachment to your computer then double clcik on it. SheetCam should start and automatically install the post. Now restart SheetCam and check iof it works for you.
- Mon Mar 11, 2024 5:31 pm
- Forum: Problems and questions
- Topic: Mach4-swiftcut post processor
- Replies: 14
- Views: 1841
Re: Mach4-swiftcut post processor
Could you set up a job ready to post process and confirm the tool number is wrong. Then save the job (File->save job as). If you let me have a copy of the job file I'll take a look and see if I can figure out what is wrong.
- Mon Mar 11, 2024 5:10 pm
- Forum: Problems and questions
- Topic: Mach4-swiftcut post processor
- Replies: 14
- Views: 1841
Re: Mach4-swiftcut post processor
Sorry, I should have looked at the thread title. Looking at the post, you should have a 'Tool type' option in your tool definition. That controls the tool number.
- Mon Mar 11, 2024 2:59 pm
- Forum: Problems and questions
- Topic: Mach4-swiftcut post processor
- Replies: 14
- Views: 1841
Re: Mach4-swiftcut post processor
What post processor are you using?
- Fri Mar 08, 2024 3:55 pm
- Forum: Problems and questions
- Topic: Z action being added, this is new
- Replies: 1
- Views: 470
Re: Z action being added, this is new
Have you updated your post processor recently? If not it may be worth installing the latest post from CandCNC.
- Mon Mar 04, 2024 3:46 pm
- Forum: New features
- Topic: Turning module
- Replies: 81
- Views: 196457
Re: Turning module
Sorry for the late reply. I just realized what is wrong. In the passes tab of your cut operation it is worth setting up a lead in and lead out. A good starting point for both lead in and lead out is an arc radius of 1mm (0.04") and a line length at least equal to your cut depth. Set the angle t...
- Thu Feb 29, 2024 1:20 pm
- Forum: Problems and questions
- Topic: Bug and Requests
- Replies: 9
- Views: 9660
Re: Bug and Requests
The reason why I have been holding off is that proper tip-up avoidance is hard. What I did is a hack that only works in some situations. It just happens to work well for your specific application.
I don't know what is going on with the profiles. I'll continue testing and see what I can find.
I don't know what is going on with the profiles. I'll continue testing and see what I can find.
- Wed Feb 28, 2024 6:04 pm
- Forum: Problems and questions
- Topic: Bug and Requests
- Replies: 9
- Views: 9660
Re: Bug and Requests
I tried it just now and it worked. Could you try again.Link says file not found....
- Wed Feb 28, 2024 3:55 pm
- Forum: Problems and questions
- Topic: Bug and Requests
- Replies: 9
- Views: 9660
Re: Bug and Requests
Hey Les, hope all has been well! We've been crazy busy over here and I haven't had time to bother you with requests and bug fixes. I'm sure you have enjoyed my silence lol. I was beginning to think it was something I said :lol: Did you ever get a chance to look into this? It looks like the profiles...