Search found 79 matches
- Fri Jul 01, 2022 6:24 am
- Forum: Problems and questions
- Topic: continuous operation
- Replies: 39
- Views: 15952
Re: continuous operation
Good afternoon, that sounds wonderfull, however I am not that smart Lots of things are possible when you know how, I am an old dog now and very hard to learn new stuff, in fact hard to learn anything at all
- Thu Jun 30, 2022 11:08 pm
- Forum: Problems and questions
- Topic: continuous operation
- Replies: 39
- Views: 15952
Re: continuous operation
Gentelmen thankyou for your replies. I was hoping that there would be something that you can do in Mach3 or the computer running the G code. Ideally I would like to know if all is operating as it should then you can walk away (not too far) and let it go. At the moment I like to the pause at the tool...
- Thu Jun 30, 2022 7:48 am
- Forum: Problems and questions
- Topic: continuous operation
- Replies: 39
- Views: 15952
Re: continuous operation
I am using a CandCNC post. DTHC-HTY-TAP_Softpierce+Marker=rev12D
- Thu Jun 30, 2022 1:00 am
- Forum: Problems and questions
- Topic: continuous operation
- Replies: 39
- Views: 15952
continuous operation
As the heading goes and again this probably has been covered before, so please let me appologise in advance, how do you get continuous operation with nested parts and different operations. Please let me explain. If I cut one part that had two operations (marking and then plasma cutting) I have 'clic...
- Wed Jun 22, 2022 4:54 am
- Forum: Problems and questions
- Topic: nesting parts
- Replies: 4
- Views: 786
Re: nesting parts
Thankyou very much for that. After some fiddling I understood what you meant. I have been trying to get this and things like this done for quite some time. This is a very handy tool, only problem I feel is the faulty operator unit pressing the buttons and the old timers disease that afflicts him
- Tue Jun 21, 2022 11:13 pm
- Forum: Problems and questions
- Topic: nesting parts
- Replies: 4
- Views: 786
Re: nesting parts
Thankyou for that reply, however that didn't work for me. I imported a drawing with three pieces on it and when I press the right mouse button I get a large columb with "set parts order" at the top. I can't seem to get the 'breakup' anywhere. I must be doimng something wrong but as yet don...
- Mon Jun 20, 2022 11:09 pm
- Forum: Problems and questions
- Topic: nesting parts
- Replies: 4
- Views: 786
nesting parts
Firstly my appologies, as this may have been covered before. I have been given a drawing (dxf) in this case three items ramdomly spaced on the drawing. What I need to do is to move the individual drawings individually around to nest them on a sheet. I know how to copy and duplicate, but that's not i...
- Mon Aug 03, 2020 8:47 am
- Forum: Problems and questions
- Topic: dxf import no layers
- Replies: 4
- Views: 772
Re: dxf import no layers
Thanks for that Steve. Yes got on here now just to clarify that very point. I have had the 'use colours as layer names' box checked for years now and never changed it, didn't know what it was for, so never touched it. Had been playing around with one of the engineers that I work with doing dxf's and...
- Sun Aug 02, 2020 10:10 pm
- Forum: Problems and questions
- Topic: dxf import no layers
- Replies: 4
- Views: 772
Re: dxf import no layers
Good morning swiftcut.
I do get the layer colours, but not the layer number / identification in the 'layer' box on the left hand side of the screen. That is what I am after, since the 'layers' from the guy doing the drawings is very important in this case
I do get the layer colours, but not the layer number / identification in the 'layer' box on the left hand side of the screen. That is what I am after, since the 'layers' from the guy doing the drawings is very important in this case
- Sun Aug 02, 2020 5:19 am
- Forum: Problems and questions
- Topic: dxf import no layers
- Replies: 4
- Views: 772
dxf import no layers
Good morning Les. I am being sent dxf files from a marine engineer, basically cut out files for the boat that we are to build. Now he has put different layers on the drawings to indicate lineup marks, bend lines, weld positioning, then the inside and outside contours. My problem is that when I impor...
- Mon Nov 25, 2019 4:21 am
- Forum: Chat
- Topic: Rotary Tube Questions
- Replies: 5
- Views: 14240
Re: Rotary Tube Questions
Good morning Les.
Just to make sure, there is no way that, that can be done in sheetcam?
Any cad package can do this? I have corel draw with dxf export (I know that it isn't a engineering drawing package), but to delete lines it should do that. I will try that for starters.
Thanks again
Just to make sure, there is no way that, that can be done in sheetcam?
Any cad package can do this? I have corel draw with dxf export (I know that it isn't a engineering drawing package), but to delete lines it should do that. I will try that for starters.
Thanks again
- Sat Nov 23, 2019 12:08 am
- Forum: Chat
- Topic: Rotary Tube Questions
- Replies: 5
- Views: 14240
Re: Rotary Tube Questions
Good morning to all. Sorry to hyjak this thread, but I have a question regarding the dxf drawings. In the video on sheetcam rotary, the piece of shs shown, is depicted as a solid 3d item, which it is supposed to be. Now I have been given a solidworks, flattened out dxf and sheetcam wants to cut alon...
- Fri Nov 22, 2019 1:15 am
- Forum: Problems and questions
- Topic: Sorrt Les rotary question
- Replies: 5
- Views: 1108
Re: Sorrt Les rotary question
Good morning to all. Again stupid question, have been playing with the rotary and all seems to be working as expected,however, my understanding is that I must either draw or get a 'opened up dxf drawing for this to work. The mod that I do work for do supply me with the dxf drawings for flat plate to...
- Fri Nov 01, 2019 12:15 am
- Forum: Problems and questions
- Topic: Sorrt Les rotary question
- Replies: 5
- Views: 1108
Re: Sorrt Les rotary question
Thankyou for that Les. Been a while and couldn't remember
- Tue Oct 29, 2019 8:56 pm
- Forum: Problems and questions
- Topic: Sorrt Les rotary question
- Replies: 5
- Views: 1108
Re: Sorrt Les rotary question
Thankyou for the reply Les. Just had a look and have the rotary Mach3 from Tom, had been so long that I couldn't remember, so all I have to do is get the rotary from your site? Is there a way to find out what I have purchased from you? Sorry for the questions, have been so busy lately, long hours, i...