Search found 3659 matches
- Mon Nov 13, 2023 8:38 am
- Forum: Problems and questions
- Topic: plasma THC define custom tool parameter for THC set volts
- Replies: 10
- Views: 63469
Re: plasma THC define custom tool parameter for THC set volts
As long as you have SheetCam TNG then yes, your license will work with the latest version.
- Fri Nov 10, 2023 8:08 am
- Forum: Problems and questions
- Topic: plasma THC define custom tool parameter for THC set volts
- Replies: 10
- Views: 63469
Re: plasma THC define custom tool parameter for THC set volts
I just tried your post here and it worked. What version of SheetCam are you using?
- Thu Nov 09, 2023 12:55 pm
- Forum: Problems and questions
- Topic: part file names
- Replies: 1
- Views: 21906
Re: part file names
Parts don't always include the drawing file name (e.g a copy won't) but something like this should work: function LoadFile(fileName) local parts = sc.Parts:Get() for idx=0, parts:GetCount() -1 do local part = parts:op_index(idx) if fileName == part:GetFileName() and not part:IsDuplicate() then parts...
- Thu Nov 09, 2023 12:36 pm
- Forum: Problems and questions
- Topic: Evaluation Limit Reached
- Replies: 8
- Views: 42851
Re: Evaluation Limit Reached
I just had a look though my records and can't find a license under your email. However if your license was supplied by a reseller they may not have put your email on the license. I think the first thing to do is to contact the supplier of the machine to clarify if they were supposed to supply a lice...
- Thu Nov 09, 2023 12:31 pm
- Forum: Problems and questions
- Topic: plasma THC define custom tool parameter for THC set volts
- Replies: 10
- Views: 63469
Re: plasma THC define custom tool parameter for THC set volts
DefineCustomToolParam should be outside of any functions. Code that is outside of a function will execute immediately when the post is selected in machine options, or when an edited post is saved. Having said that, even if you do have that code inside a function you should not get that error. I just...
- Wed Nov 08, 2023 10:56 am
- Forum: Problems and questions
- Topic: Autoload plugin not working
- Replies: 4
- Views: 28047
Re: Autoload plugin not working
Taking another look at the code I think you are right. However it has always worked in the past. I'll update the plugin for future releases.
- Tue Nov 07, 2023 4:57 pm
- Forum: Problems and questions
- Topic: Autoload plugin not working
- Replies: 4
- Views: 28047
Re: Autoload plugin not working
Try disabling the plugin then look at the log again. Do you still get a warning like this:
Assert failure in function wxDir::GetFirst (C:\wx-3.0\wxWidgets\src\msw\dir.cpp:409). must wxDir::Open() first ("IsOpened()")
Does it work if you choose a directory on your C drive?
Assert failure in function wxDir::GetFirst (C:\wx-3.0\wxWidgets\src\msw\dir.cpp:409). must wxDir::Open() first ("IsOpened()")
Does it work if you choose a directory on your C drive?
- Sat Oct 28, 2023 8:24 am
- Forum: Problems and questions
- Topic: Adding Options to Plasma Tool dialog - not enigh screen space
- Replies: 6
- Views: 10768
Re: Adding Options to Plasma Tool dialog - not enigh screen space
Unfortunately that would be quite hard to implement.
- Fri Oct 27, 2023 5:21 pm
- Forum: Problems and questions
- Topic: Adding Options to Plasma Tool dialog - not enigh screen space
- Replies: 6
- Views: 10768
Re: Adding Options to Plasma Tool dialog - not enigh screen space
I'm afraid there isn't much I can do about it in the short term. I'll add scrolling to the to-do list.
- Wed Oct 25, 2023 3:28 pm
- Forum: Problems and questions
- Topic: Adding Options to Plasma Tool dialog - not enigh screen space
- Replies: 6
- Views: 10768
Re: Adding Options to Plasma Tool dialog - not enigh screen space
1080p should be plenty. The plasma tool dialog should fit on a 720p display. Are you running a post processor that adds a lot of extra options?
- Wed Oct 25, 2023 3:26 pm
- Forum: Problems and questions
- Topic: Rotary simulation tool position
- Replies: 1
- Views: 5579
Re: Rotary simulation tool position
Hold down the shift key while dragging with the mouse. That will rotate the display.
- Wed Oct 25, 2023 3:24 pm
- Forum: Problems and questions
- Topic: Add x,y,z jog to end of operation
- Replies: 2
- Views: 5548
Re: Add x,y,z jog to end of operation
The simplest way to do this is to use the parking position. In SheetCam go to Options->job options->parking. Turn on 'Use X' and 'Use Y' then enter the coordinates you want to move to.
- Fri Oct 20, 2023 1:59 pm
- Forum: Problems and questions
- Topic: turtorials?
- Replies: 2
- Views: 5998
Re: turtorials?
If you go to YouTube and do a search for SheetCam tutorials you will find quite a few. The ones by Arclight Dynamics are very good.
- Wed Oct 18, 2023 7:57 pm
- Forum: Problems and questions
- Topic: Plasma Post Processor read the Leadin type
- Replies: 4
- Views: 5978
Re: Plasma Post Processor read the Leadin type
How are you detecting wiggle and ramp?
I have to admit I would prefer to add an option allow the g-code to specify Z axis moves.
I have to admit I would prefer to add an option allow the g-code to specify Z axis moves.
- Wed Oct 18, 2023 2:43 pm
- Forum: Problems and questions
- Topic: Plasma Post Processor read the Leadin type
- Replies: 4
- Views: 5978
Re: Plasma Post Processor read the Leadin type
leadinType only specifies if it is a lead in or a lead out.
There isn't any easy way for the post to know of the pierce is a ramp or wiggle pierce.
There isn't any easy way for the post to know of the pierce is a ramp or wiggle pierce.