sheetcam.com

I went ahead and imported the post into the Linux install and it works perfectly. I still need to add the M08/09 commands manually but that's easy. When I load the gcode it produces into bCNC, in the displayed image, the arcs are turned into 3-4 lines with angles, but the little cone that simulates ...

I just double checked and my primary CAD/CAM computer is running the Linux version of sheet cam. Should I be trying this post processor on the computer that's running Sheetcam in Wine or on the one with the Linux installation, or does it even matter?

Thanks again.

I can't express my gratitude for your assistance here. I'll try it right now.

I thought I was using the linux version of sheetcam but on the machine I've been working on, I've been using the windows version in wine, with a grbl with scriber post that I found posted here on the forum. I'll see if the other machine outputs the same stuff. Line N0130 is the first place that this...

Thanks so much for posting this! I've been fighting the exact same thing for days! I'm running the linux version too and attempting to use the grbl thc with scriber post too. I had to modify it to add M08/09 commands to control my thc but it's been fighting me with mystery code that locks up grbl. A...