Search found 257 matches

by WyoGreen
Fri Sep 13, 2019 4:20 pm
Forum: Problems and questions
Topic: Development version import problems
Replies: 11
Views: 3117

Re: Development version import problems

You could always export from CorelDraw as an .svg, Sheetcam likes .svg files.
by WyoGreen
Sat Sep 07, 2019 12:08 am
Forum: Problems and questions
Topic: Center torch to hole center and burn from center?
Replies: 3
Views: 899

Re: Center torch to hole center and burn from center?

In the Sheetcam options -> Job options -> Material, you can select the origin point. Lower left, Center, Upper Right, etc. If you picked the center, then the torch would start from the material center, then go to the circle edge and start cutting. You would still want to line up the material so the ...
by WyoGreen
Sat Jul 13, 2019 1:14 am
Forum: Problems and questions
Topic: Little holes in my work
Replies: 4
Views: 955

Re: Little holes in my work

I suspect if you were to blow up your file in your drawing program, you would find some stray "dots" placed where Sheetcam is posting them to be cut. I sometimes find these artifacts in some of the artsy drawings. They can be fun to find. If you display your tool-paths and start points in ...
by WyoGreen
Thu May 02, 2019 11:34 pm
Forum: Problems and questions
Topic: Sheetcam toolpath not showing
Replies: 1
Views: 869

Re: Sheetcam toolpath not showing

On the top of your screen there is a toolbar with a number of push buttons to show or hide a number of different things. You probably clicked on the toolpath button by accident.

Steve
by WyoGreen
Tue Apr 09, 2019 6:19 pm
Forum: Problems and questions
Topic: No Title
Replies: 9
Views: 9025

Re: No Title

This idea is probably a moot point now that the development version no longer has the warning, but here is my thoughts on the subject anyway. 8) Perhaps the rapid clearance height should not be a job option, but rather a tool option in the tool table, which is then used by the post processor to set ...
by WyoGreen
Wed Mar 20, 2019 3:51 pm
Forum: Problems and questions
Topic: Changing the tool description
Replies: 4
Views: 4131

Re: Changing the tool description

You'll probably have to reload the CandCNC toolset to get those headings back.
by WyoGreen
Fri Mar 15, 2019 2:05 pm
Forum: Problems and questions
Topic: sheetcam to linux
Replies: 2
Views: 3382

Re: sheetcam to linux

On the Sheetcam website where you downloaded Sheetcam for Linux, there are instructions for installing the program.
by WyoGreen
Sat Feb 02, 2019 3:40 pm
Forum: Problems and questions
Topic: Problems with Linux command CNC after switching to new computer
Replies: 6
Views: 4267

Re: Problems with Linux command CNC after switching to new computer

Over in the CandCNC forum they've had a thread on this. Basically it says with CommandCNC you don't need to use any cut rules as CommandCNC knows when to slowdown for corners and holes by itself. The thread went on to say that cut rules will fight with CommandCNC and give you all kinds of weird prob...
by WyoGreen
Sat Jan 26, 2019 10:34 pm
Forum: Problems and questions
Topic: CommandCNC1.1
Replies: 6
Views: 4474

Re: CommandCNC1.1

Yea, I found it and installed it in Sheetcam. The check boxes show up now, everything works great. The reason I had troubles finding it was that I use a computer in my office to do the design stuff. So I had to copy the post on my cutting computer and move it to my design computer to install on Shee...
by WyoGreen
Sun Jan 13, 2019 11:17 pm
Forum: Problems and questions
Topic: CommandCNC1.1
Replies: 6
Views: 4474

Re: CommandCNC1.1

CommandCNC1.1 was just released a couple days ago, so I wouldn't doubt that there is a newer post that hasn't been released yet. No big deal, I'm sure it'll all get straightened out next week. I just didn't have a lot to do this weekend, so I started playing with the new program release. From what I...
by WyoGreen
Sun Jan 13, 2019 8:16 pm
Forum: Problems and questions
Topic: CommandCNC1.1
Replies: 6
Views: 4474

Re: CommandCNC1.1

Yea, I have the latest post, and did actually download it again and select it again, but that didn't seem to do the trick.

Steve
by WyoGreen
Sun Jan 13, 2019 6:16 pm
Forum: Problems and questions
Topic: CommandCNC1.1
Replies: 6
Views: 4474

CommandCNC1.1

Hi Les, I have a question/problem? I'm in the process of upgrading my CandCNC CommandCNC1.0 to 1.1. One of the things in the release notes (about the 5th sheet in) shows that there is a check box for AutoSet in the Jet cutting operations settings window using the CandCNCPlasmaLLCNC-rev26.scpost and ...
by WyoGreen
Tue Jan 08, 2019 10:27 pm
Forum: Problems and questions
Topic: Help with licsence.
Replies: 12
Views: 6368

Re: Help with licsence.

If I remember right, there is a menu item on the File drop down menu that is labeled "Save toolset as" that lets you save the current toolset where ever you want. Then you can take that toolset and load it on the laptop via File/load default toolset.

Steve
by WyoGreen
Sat Dec 22, 2018 5:57 pm
Forum: Problems and questions
Topic: Plasma torch height problem
Replies: 2
Views: 618

Re: Plasma torch height problem

I would suggest you ask this question over on the PlasmaSpider forum. There are several guys over there that use the Proma THC.

https://www.plasmaspider.com

Steve
by WyoGreen
Mon Dec 10, 2018 3:37 pm
Forum: Problems and questions
Topic: plasma table not responding to mach3
Replies: 6
Views: 1058

Re: plasma table not responding to mach3

What post are you using?