Search found 95 matches

by Vmax549
Sat Jul 11, 2015 12:12 am
Forum: Contributed plugins, tools and posts
Topic: Scam Feeds and Speeds
Replies: 1
Views: 7054

Scam Feeds and Speeds

Here is a Plugin that does calculations for speeds and feeds. A chart is provided to give you the base info needed. To use UNZIP it inot yuour plugins directory and then restart SheetCam. Then from the plugins menu select Feeds and speeds. Fill in the values and it does the calculations. The top 2 t...
by Vmax549
Thu Jul 09, 2015 2:59 am
Forum: Contributed plugins, tools and posts
Topic: Scam DRAW plugin
Replies: 10
Views: 17927

This is the latest Version it has two new added functions.

circle,1.111 draws a circle of 1.111 units USe G0 to move to position and then call function

boltcircle,1.111,2.222,10,5,0 Draws a bolt circle at Xpos,Ypos,#holes,Circle Diam,start angle

(;-) TP
by Vmax549
Thu Jul 09, 2015 2:29 am
Forum: Contributed plugins, tools and posts
Topic: Scam PartView
Replies: 0
Views: 7511

Scam PartView

This plugin allows you to View JOB Files from inside SheetCam. Unzip the file into the SheetCam plugins directory. The plugin assumes that your JOB file are in your JOB directory. From the plugin you can change to other drives or directories to select a file. When you see the file you want click on ...
by Vmax549
Thu Jul 09, 2015 2:15 am
Forum: Contributed plugins, tools and posts
Topic: Scam DXFview
Replies: 1
Views: 16483

Scam DXFview

This plugin allows yoou to View DXF Files from inside SheetCam. Unzip the file into the SheetCam plugins directory. The plugin assumes that your DXF file are in your Drawings directory. From the plugin you can change to other drives or directoryies to select a file. When you see the file you want cl...
by Vmax549
Tue Jul 07, 2015 9:27 pm
Forum: Contributed plugins, tools and posts
Topic: Scam DRAW plugin
Replies: 10
Views: 17927

(;-) Try this version it should be fixed now and install correctly. Unzip it to the SheetCam plugins directory. Then start Scam and it should show up .
It should NOT require admin rights now.

(;-)TP
by Vmax549
Tue Jul 07, 2015 3:44 pm
Forum: Contributed plugins, tools and posts
Topic: Scam DRAW plugin
Replies: 10
Views: 17927

HI Les , Yes I was trying to keep the manual install simple without having to do multiple files copies over to more than 1 directory. I can change that . Here I always run Scam as Admin rights so I never notice the problem. Also I just retired a clean install of the plugin and it works fine here. Sa...
by Vmax549
Tue Jul 07, 2015 2:38 pm
Forum: Contributed plugins, tools and posts
Topic: Scam DRAW plugin
Replies: 10
Views: 17927

Scam DRAW plugin

Well Guys Scam Draw is a reality. Yo can now draw shapes in SheetCam. It is based on Gcode words and draws exactly how Gcode words create elements(lines,arc,etc). My Good friend Keith created a short Video showing the very basics of Draw. IT is a very simple process. Les was a great help to create t...
by Vmax549
Wed Jun 17, 2015 4:23 pm
Forum: New features
Topic: Conversational SheetCam
Replies: 0
Views: 5613

Conversational SheetCam

I have been loking into doing a new plugin for SheetCam that will aloow you to draw a shape in SheetCam directly from a command line input. After the shape is complete you would process it with standard Scam operations to create a working gcode file to produce that part. From a window you would type...
by Vmax549
Sat May 09, 2015 4:30 pm
Forum: Yahoo posts
Topic: TNG development V6.1.15 released
Replies: 2
Views: 7307

HIYA Les, I do not see that the Material Name is working. It is not being saved. Also the debug still does not set the bookmark.

(;-) TP
by Vmax549
Tue May 05, 2015 10:15 pm
Forum: New features
Topic: Tidy up the toolbox?
Replies: 9
Views: 8706

Not a problem BUT I need to wait for Les to fix a couple of things first in Scam. Hopefully next update.

(;-) TP
by Vmax549
Tue May 05, 2015 7:48 pm
Forum: Problems and questions
Topic: Can i set cut paths manually?
Replies: 4
Views: 2637

(;-) How hard could that be there are ONLY 21 total lines and it could be drawn with 13 lines and a couple of trims.

The way you are laying it out will be be time consuming to cut. A lot of overlaping cuts.

BUT to each their own, (;-) TP
by Vmax549
Tue May 05, 2015 4:51 pm
Forum: New features
Topic: Tidy up the toolbox?
Replies: 9
Views: 8706

I have been playing with Plugins and created a master tool set function. You can also sort by tool Number OR Diameter.
by Vmax549
Thu Apr 30, 2015 2:50 pm
Forum: Problems and questions
Topic: Can i set cut paths manually?
Replies: 4
Views: 2637

Put all of the horizontal lines in one layer and the vertical lines in another.

(;-) TP
by Vmax549
Wed Apr 29, 2015 4:26 pm
Forum: New features
Topic: Scrap cut
Replies: 4
Views: 4594

Resist the force Obewon. If using Mach3 you can use a button code to setup a cut function. Move to the start point press button then move to end point press the button and it creates its own Gcode to do the cut. BUT now conversational Sheetcam I would buy (:-) SheetCad now that is a slippery sloap. ...
by Vmax549
Wed Apr 29, 2015 4:11 pm
Forum: Problems and questions
Topic: Shape library wizard
Replies: 3
Views: 2140

It is not TOO bad doing shapes ONCE you get the hang of how it works.

You can look at the code that is already used as an example.

(;-) TP