sheetcam.com

Sorry for the delay in answering but you should not need any extra software. In SheetCam go to Options->machine->post processor and select the burny25 post processor. Next change the 'Output file extension' setting to nc instead of tap.

Could you send me an example job file demonstrating the issue.

I'm sorry but I have never used a Burny controller, so I don't know. Hopefully the Burny manual should tell you.

It looks like the taper from the tool post angle is caused by the path generator appying the tool path angle the wrong way around. Reversing the turrent angle generates the correct tool paths but simulation will get upset. I'll have to fix this. The outer diameter and inner diameter are roughly the ...

It's starting the path 1 tool radius in from the start point and ending 1 tool radius before the end point.
Looking at the code I specifically offset the start and end points but now I have no idea why I did it!

Sorry for the delay in replying. I just emailed you a temporary license. The generated code should be in diameter mode. The slope had me puzzled for a moment but it is caused by your tool definition. You have a side angle of 0 degrees with a clearance angle of 2 degrees. When generating tool paths S...

Is this with AMD on-board graphics or with an AMD card? The issue must be only on specific AMD setups or I would have more complaints of this issue.
Try enabling View->Show true width. Does that help?

Just to add to djreiswig's suggestion you can find the plugin in Options->plugin options->moreposts.

Historically SheetCam's SVG import was a bit buggy but these days it is pretty solid. These days the choice of file format mostly relates to the application the file was exported from. For example Inkscape has history of isses with it's dxf export so I generally recommend SVG with Inkscape. In your ...

If the files look the same in QCad then the problem is almost definitely Sketchup. I'm afraid I don't use Sketchup so I can't offer any more advice on how to fix it.

Sorry for the delay in replying. I'm afraid Wright distributed pirated licenses that no longer work. I'll reply to your email to sort that out. When you first load your drawing do you reassign your profiles to different layers? If you move everything off of layer 0 then save and relload the job, lay...

I can replicate the fault here. Most input boxes allow you to enter expressions. For instance if you want to define an operation that always cuts through your material plus a bit you could set the cut depth to: MaterialThickness + 0.5mm Now if you change the material thickness that operation will au...

Well, that's unexpected. I'll run some tests and see if I can replicate the problem. Thanks for letting me know what you found.

It's called 'rest machining' and I have looked into it a couple of times. Unfortunately I haven't yet figured out a good, reliable way of implementing rest machining.

Could you post the problem file here or email it to me direct. Job files are roughly 50% text so if you can't read it in Notepad it must be pretty badly damaged.