Search found 217 matches
- Thu Jan 30, 2020 9:24 pm
- Forum: Problems and questions
- Topic: Nesting mode selecting multiple parts
- Replies: 2
- Views: 1018
Re: Nesting mode selecting multiple parts
Left click and drag around to select parts works well for that.
- Wed Jan 08, 2020 5:42 pm
- Forum: Forum help
- Topic: Offset
- Replies: 15
- Views: 22246
Re: Offset
Sorry just looked in Mach and that option 'ignore tool change' is ticked.
Maybe its slighty different to how I described, it doesn't stop and then need input to carry on, it's just a slight pause and then carries on, it does loose time on a big job though.
Maybe its slighty different to how I described, it doesn't stop and then need input to carry on, it's just a slight pause and then carries on, it does loose time on a big job though.
- Wed Jan 08, 2020 5:38 pm
- Forum: Forum help
- Topic: Offset
- Replies: 15
- Views: 22246
Re: Offset
I always get a pause when I have 2 different tools in the one operation, that's usually my cue to hit the spacebar as must be a mismatch in chosen tool :lol: Your control is stopping to allow you to change tools. Most control software can be configured to ignore tool changes. Alternatively the post...
- Tue Jan 07, 2020 11:31 pm
- Forum: Forum help
- Topic: Offset
- Replies: 15
- Views: 22246
Re: Offset
I always get a pause when I have 2 different tools in the one operation, that's usually my cue to hit the spacebar as must be a mismatch in chosen tool
- Wed Dec 11, 2019 7:27 pm
- Forum: Problems and questions
- Topic: .part not saving path rule selections with part
- Replies: 17
- Views: 3749
Re: .part not saving path rule selections with part
Thanks Les, good job.
- Fri Sep 06, 2019 3:40 pm
- Forum: Problems and questions
- Topic: Dev version saving
- Replies: 3
- Views: 642
Re: Dev version saving
Beat me before I'm even finished for the day, many thanks, that's got it!
- Fri Sep 06, 2019 12:08 pm
- Forum: Problems and questions
- Topic: Dev version saving
- Replies: 3
- Views: 642
Re: Dev version saving
Excellent, many thanks, no panic for me, hols for a week now
- Thu Sep 05, 2019 8:52 pm
- Forum: Problems and questions
- Topic: 6.1.59 Problems
- Replies: 25
- Views: 12898
Re: 6.1.59 Problems
It does it on both my win 7 machines, I can open a job file from sheetcam no problem, its when you open a job file from outside sheetcam the problem is, it opens the job file but it seem to be a copy, says untitled in the title bar.
Many thanks
Many thanks
- Thu Sep 05, 2019 7:01 pm
- Forum: Problems and questions
- Topic: 6.1.59 Problems
- Replies: 25
- Views: 12898
Re: 6.1.59 Problems
Did you get a chance to look at this as well Les?
https://www.forum.sheetcam.com/viewtopi ... 055#p26152
https://www.forum.sheetcam.com/viewtopi ... 055#p26152
- Wed Sep 04, 2019 11:01 am
- Forum: Problems and questions
- Topic: Dev version saving
- Replies: 3
- Views: 642
Dev version saving
Hi Les, Just updated dev version and notice now when opening a job file from win explorer that it opens it as a copy I think that's what's happening, it says 'untitled' That's a pain rather than just saving you need to find the file and replace, unless you have added something else in options I have...
- Tue Jul 16, 2019 10:50 am
- Forum: Problems and questions
- Topic: Nesting mode
- Replies: 42
- Views: 17061
Re: Nesting mode
Thanks Les, to be honest though it's not that often you have the same operations on all parts within a sheet at least I don't seem to do, parts with square corners I find the tangent lead-in and out best where as round parts I go with a arc. It's easy enough really on a single file full sheet dxf to...
- Tue Jul 16, 2019 5:35 am
- Forum: Problems and questions
- Topic: .part not saving path rule selections with part
- Replies: 17
- Views: 3749
Re: .part not saving path rule selections with part
Have you tried the 'copy all' to copy the operations?
It even works copying from another job file.
It even works copying from another job file.
- Mon Jul 15, 2019 9:07 pm
- Forum: Problems and questions
- Topic: Nesting mode
- Replies: 42
- Views: 17061
Re: Nesting mode
Can it be made to work if one part is selected and disabled if multiple parts are selected? Yes that really would be a godsend, I've been working with nested sheet files the few jobs where the full sheet is one dxf, I try and get all the operations sorted before breaking up (I presume that's the be...
- Mon Jul 15, 2019 8:53 pm
- Forum: Problems and questions
- Topic: .part not saving path rule selections with part
- Replies: 17
- Views: 3749
Re: .part not saving path rule selections with part
I asked about that a few years ago, have a look here. https://www.forum.sheetcam.com/viewtopic.php?f=4&t=6590 I've been saving each toolset in it own material folder, ie: 3mm/ stainless/steel/alum then save as finecut or whatever at least that way rules for particular material thickness are save...
- Tue Jun 25, 2019 3:14 pm
- Forum: Problems and questions
- Topic: Nesting mode
- Replies: 42
- Views: 17061
Re: Nesting mode
Ah right, no worries just thought it was worth a mention, cheers