sheetcam.com

That's what I'm thinking.. Cuz I put the file into sheet cam with out the lines and after I post processed it see sheetcam added its own.. .. edit-- i ran file and it cut perfect, except a new issue, after the cut the torch goes back to the 00 position, quickly it seems but the torch is almost still...

I went and looked at the file I didn't make it.. but opened it and zoomed in and their were 2 lines.. I removed them and will test cut one tomorrow. Will attach pics.

Yes I've posted in another group also. ? Something wrong with that? Lol

edit, i thought plasmaspyder was a different page lol...

In sheetcam.. what is the difference between when u goto operation --> then select jet cutting... that main page.. and then whne u click the 3 dots (...) after tool and anoth44 pages comes up I will attach pics...? At the bottom u less u click on use lead in setting they are grayed out.. vs. The fir...

Is that pretty easy to do in sheetcam? I also have a video of the cut

Not sure if I can post that, I'm only 1 week into this so I really don't know much
. Just enough to be dangerous I guess

I will attach pics...
I'm guessing there is a setting to correct this.
1/4" plate 45 amp 1mm tip.

Thanks

ok ya i dont have that, ive just been changing the amps on the machine, and setting feed rate etc in sheet cam, working well.

their is a port on the back of the unit, i believe that just tells it to turn on and off and some power to the THC...?
ok so just turn dial on the front of the unit, thats easy..

thanks

no replys... did you ever figure one out? if so let me know i just got one..

thanks

just got a table. im running sheetcam and mach3 to cut... the machine is an everlast 82i where do u set the amps to cut? i dont see option in sheetcam under cutting tool just feed rate pierce delay etc. of course the name of the tool shows the amps like for example -- HT-85 {45 amp} 16ga Steel but t...