sheetcam.com

Some experiments with Rotary plasma. I'm still experimenting with markers. I use Mach3 Rotary as code.
Does it use Probe and THC?
https://youtu.be/oYO3UDu08VQ?si=SQi1QI_Cwrp-C4fo

Good thing.
Are you using Floating Head?
Probe and THC?
I haven't operated on Rotary yet.
Are they used with that code?
I haven't found any video on how to reset the z-axis.
Of course, if they are in use, the reset happens automatically.

I got it working, I changed the post processor. I have Mach3 in use. Now the Y-axis is controlled.
I have a YA axle in use.
https://youtu.be/p5nDx3gitCQ?si=nhbtNZHk64A-QgFu

In the video, I have connected the signal wires to a cross. The x-axis is the y-axis and the y-axis is the x-axis. The machine then works correctly.

I have a Rotary Plasma in the works and some problems. Due to the structure of the machine, the g-code should control the y-axis and not the x-axis. Can I change something so that I can control the y-axis of the machine? I turned the control with the BOB card between x and y axis but it is not good....

one friend has a Starfire CNC plasma which is made with the CAM Fastcam program.
Can the CAM program Starfife plasma be made with the Sheetcam program?
There is no known post processor.
And the machine is not found on the list.

I got into action...
https://youtu.be/pkJF9S3MDK4

I draw pictures with the Fusion 360 program and make the cam program with Sheetcam.
With small holes, there is a problem when you should only get the marking of the holes.
I can't do just marking.
How do I do that?