Search found 8 matches
- Tue May 09, 2023 9:50 am
- Forum: Problems and questions
- Topic: ROTATION SPEED FOR ROTARY PLUGIN NOT CORRECT?
- Replies: 2
- Views: 2285
Re: ROTATION SPEED FOR ROTARY PLUGIN NOT CORRECT?
Hello. did you solve the problem with the high speed of passing the pipe edge?
- Tue Aug 09, 2022 9:36 am
- Forum: Problems and questions
- Topic: Suitable post processor for F2100b Chinese controller
- Replies: 2
- Views: 1215
Re: Suitable post processor for F2100b Chinese controller
Hello. I use - hypertherm edge. Works great.
- Fri Aug 05, 2022 7:23 am
- Forum: Problems and questions
- Topic: Problem with Plasma Cutting of Square and Rectangular Tubes (Seetcam Rotary+Mach3)
- Replies: 0
- Views: 51479
Problem with Plasma Cutting of Square and Rectangular Tubes (Seetcam Rotary+Mach3)
Large melting (very large cutting width) of the metal on the edges (square, rectangular pipe), due to the low speed of the cutter.
Cutting flat sections and round pipes is no problem.
Maybe there are special settings in SheetCAM, Mach3.
Cutting flat sections and round pipes is no problem.
Maybe there are special settings in SheetCAM, Mach3.
- Sat Dec 18, 2021 1:56 pm
- Forum: Problems and questions
- Topic: Z-axis zero from the pipe surface (sheetcam rotary+Mach3)
- Replies: 8
- Views: 1237
Re: Z-axis zero from the pipe surface (sheetcam rotary+Mach3)
Thanks for the detailed answer.
- Sat Dec 18, 2021 8:42 am
- Forum: Problems and questions
- Topic: Z-axis zero from the pipe surface (sheetcam rotary+Mach3)
- Replies: 8
- Views: 1237
Re: Z-axis zero from the pipe surface (sheetcam rotary+Mach3)
Thank you.
This means that the postprocessor already contains an algorithm for the touch sensor and the M3 macro should be left in Mach3 by default.
Or, in the postprocessor, you need to change the values of variables (refHome, or others)?
This means that the postprocessor already contains an algorithm for the touch sensor and the M3 macro should be left in Mach3 by default.
Or, in the postprocessor, you need to change the values of variables (refHome, or others)?
- Fri Dec 17, 2021 7:49 pm
- Forum: Problems and questions
- Topic: Z-axis zero from the pipe surface (sheetcam rotary+Mach3)
- Replies: 8
- Views: 1237
Re: Z-axis zero from the pipe surface (sheetcam rotary+Mach3)
Sorry about which link you are talking about.
- Fri Dec 17, 2021 6:22 pm
- Forum: Problems and questions
- Topic: Z-axis zero from the pipe surface (sheetcam rotary+Mach3)
- Replies: 8
- Views: 1237
Re: Z-axis zero from the pipe surface (sheetcam rotary+Mach3)
What is the algorithm for the touch sensor in this case (am I using a macros M3)? Dim Feed Const DRO_X = 0 Const DRO_Y = 1 Const DRO_Z = 2 Feed = FeedRate Code "G31 Z-20 F400" While IsMoving() Sleep 100 Wend Code "G92 Z0" While IsMoving () Sleep 100 Wend Code "G0 Z4 F500&quo...
- Fri Dec 17, 2021 3:28 pm
- Forum: Problems and questions
- Topic: Z-axis zero from the pipe surface (sheetcam rotary+Mach3)
- Replies: 8
- Views: 1237
Z-axis zero from the pipe surface (sheetcam rotary+Mach3)
I work with sheetcam rotary and mach3, we use a postprocessor PlasmaRotary Mach3.scpost.
The Z axis is measured from the centerline of the pipe, and is required from the surface of the pipe.
What needs to be done so that the z axis reads zero from the pipe surface?
The Z axis is measured from the centerline of the pipe, and is required from the surface of the pipe.
What needs to be done so that the z axis reads zero from the pipe surface?