sheetcam.com

I just did that and it worked perfect. That is just what I wanted. This will come in handy. Thanks for the help.

Is there a way to Move the start point from one side of the cut line to the other. For instance when doing an inside or online cut the pierce will be on the inside. I want to move it to the opposite side so my pierce will not be in the part and allow a little extra clearance for a slot. I hope that ...

Hello, I want to thank you guys for your help. I spent alot of time trying to figure out my problem for myself. The help I recieved was perfect and I'm up and running well. I'm happy to be part of a forum that is helpful and kind to the newbies. Knowing I have this awesome knowledge base at my finge...

Awesome. It looks like I remove the dashes. What would you recommend for reference speed?
Thanks

Maybe this is better. --THC on and off codes. Use nil if you don't want THC control e.g: -- thcOnCode = nil -- thcOffCode = nil --here is another example that use M667 and M666 --thcOnCode = " M205" --thcOffCode = " M206" --************************************************ --*** S...

Thanks Man cave dweller (Awesome Name LOL) I hope this attachment is right.
Stacy

Here is a small portion of it. I don't know much about Macros and Gcode but I have been learning. I added a variable to this file but it did not make a difference. I really appreciate your help. N0010 (Filename: DG Golf 4.tap) N0020 (Post processor: uccnc jcoldon.scpost) N0030 (Date: 24/08/2021) N00...

I am using the UCCNC plasma post processor by jcolden. It seems to be working ok except it runs very very slow on the first probe to reference the metal. After that it seems to work ok when probing down after each cut (Dry Run). Another problem is I cannot get the torch to fire and have not found wh...

Thanks a million my friend! I'm back up and running. What do you think the issue is with the raising torch after the pierce firing? It would work fine on the old files I had made previously so I'm sure its a setting I must have changed.

I'm beginning to wonder if there is anything I can't mess up! Sheetcam has been working great! I tried using a different post processor for an old table I'm trying to upgrade, for some reason when i swittced back to the firecontrol processor I was using it caused a glitch in the file that made the t...