Search found 9 matches
- Sat May 26, 2018 1:52 am
- Forum: Problems and questions
- Topic: Rapid rate
- Replies: 4
- Views: 1653
Re: Rapid rate
N0010 G20 N0020 F1 N0030 G53 G90 G40 N0040 G00 X0.5000 Y0.0000 N0050 G38.2 z-1.969 F19.685 N0060 G92 Z0.0 N0070 G00 Z0.0591 N0080 G92 Z0.0 N0090 G00 Z0.2000 N0100 M03 N0110 G04 P1.0 N0120 G01 Z0.1000 F600.0 N0130 Y5.0000 F30.0 N0140 M05 N0150 G04 P0.3 N0160 G00 Z1.0000 N0170 X1.0000 Y0.0000 N0180 G...
- Thu May 24, 2018 8:18 am
- Forum: Problems and questions
- Topic: Rapid rate
- Replies: 4
- Views: 1653
Rapid rate
Most likely its in front of my eyes but I cannot see it!
Where can I set the rapid feed rate? The tool moves at the same speed on G0 and on G1/G2/G3 moves!
Where can I set the rapid feed rate? The tool moves at the same speed on G0 and on G1/G2/G3 moves!
- Wed May 23, 2018 3:44 pm
- Forum: Problems and questions
- Topic: Grbl problems
- Replies: 24
- Views: 10007
Re: Grbl problems
Ok, I solved it. Thank you for the help. The problem now was that the "NonModalNumber" has to be like this, and not "nonModalNumber", be aware of the upper case. The complications arose because a) in the stable version there is no "grbl post processor" b) in the Linux d...
- Wed May 23, 2018 3:25 pm
- Forum: Problems and questions
- Topic: Grbl problems
- Replies: 24
- Views: 10007
Re: Grbl problems
still same error
- Wed May 23, 2018 1:20 pm
- Forum: Problems and questions
- Topic: Grbl problems
- Replies: 24
- Views: 10007
Re: Grbl problems
Djreiswig thank you for replying to me, I appreciate it. I am sorry if I ask some dumb questions About the post documentation file, is it a separate file, where can I find it? The description on each post is limited. What is the process to change the modalnumber lines to nonmodal ones? I tried to ch...
- Wed May 23, 2018 2:55 am
- Forum: Problems and questions
- Topic: Grbl problems
- Replies: 24
- Views: 10007
Re: Grbl problems
Now I have problem on the N500 line. It shows the "G02", misses the X, Y, but shows the I,J offset.
- Wed May 23, 2018 2:24 am
- Forum: Problems and questions
- Topic: Grbl problems
- Replies: 24
- Views: 10007
Re: Grbl problems
Thank you!!!!!!!!!!!!! That worked!!!!!!!!!!!!!!!!!!!
- Wed May 23, 2018 12:36 am
- Forum: Problems and questions
- Topic: Grbl problems
- Replies: 24
- Views: 10007
Re: Grbl problems
If I remember right, the lines without the G commands normally use the last G command issued. Steve Maybe but the wrkflow of adding manually the G command is far from ideal. So, after more digging I found out that in Linux, only the development version is available for download. I managed to kind o...
- Tue May 22, 2018 6:09 pm
- Forum: Problems and questions
- Topic: Grbl problems
- Replies: 24
- Views: 10007
Grbl problems
Hello, I just bought the sheetcam and along other minor problems (frequent freezes) on Linux I have one that looks serious. I use the Grbl THC with scriber post processor, but the g-code it generates, has lines without any G command , just X and Y lines with values. No G01 G00 or anything like that ...