sheetcam.com

I might have fixed it, or figured it out

In the post "number of units per revolution
Units per rev = 360

I changed the number on Units per rev to 1
Everything seems normal now

I wounder if i opened up a older job and saved the currant default settings by mistake...

I've been using the Plasma Rotary Mach 3 post for a tube cutter I had built, It was working well until something happened in either mach or sheetcam. I honesty don't know what happened but I can no longer get the tube cutter to work, When I load a TAP file and hit run the rotary spins around forever...

Thanks Les! Sorry, I have a rotary chuck and just a liner slide, the torch is fixed. I have the sheetcam rotatory plug in. So far I got everything working, I ended up using the plasma rotatory mach 3 post and just changed my pin outs in mach. I now however have one more problem all the DFX and SVG f...

Hey guys, I need some help modifying a post processor. The two that I see in sheetcams select menu that would fit my machine I built. One is the mach3 tube cutter post and the other is rotary plasma post. My machine only has linear and rotational movement, the Z is fixed so there's only two axis con...